15A-SIS3-1 [SPECIAL INVITED]

Recent Trend of Casting Technology and Applications

K. Shimizu
Muroran Institute of Technology (Japan)

15A-SIS3-2 [SPECIAL INVITED]

The Latest Trend and Application Example of Forging Technology in Japan

T. Ishikawa
Nagoya University (Japan)

15A-SIS3-3 [SPECIAL INVITED]

Fineblanking

K. Hayashi
Committee on Fineblanking (Japan)

15A-SIS3-4 [SPECIAL INVITED]

New Technology for Functional Interface Creation Utilizing Powder Jet Deposition

T. Kuriyagawa, C. Nishikawa
Tohoku University (Japan)

15A-SIS3-5 [SPECIAL INVITED]

Powder Metallurgy in a Competitive Environment:
New Materials, Related Processes and Improved Energy Consumption

V. Arnhold¹, G. Kotthoff², R. Link^2
1Powder Metallurgy Solutions, ²GKN Sinter Metals Engineering GmbH (Germany)

15B-T5-1

Optimization of Injection Molding Parameters for Stainless Steel via Metal Injection Molding Based on the Response Surface Method

M. F. Abdullah, A. B. Sulong, N. Muhamad, M. I. H. Abdullah
Universiti Kebangsaan Malaysia (Malaysia)

15B-T5-2

Analysing Debinding and Sintering of Iron Feedstocks by Mass Spectrometry

T. Hartwig¹, R. M. Schroeder^2
1Fraunhofer-IFAM (Germany), ²Federal University of Santa Catarina (Brazil)

15B-T5-3

Rheological Properties of Titanium Alloy Powder Feedstock, Debinding and Sintering Behavior

G. Chen¹, G. Wen¹, N. Edmonds¹, Y. Li², P. Cao^1
1The University of Auckland (New Zealand), ²Central South University (China)

15B-T5-4

The Effect of Low Temperature Thermal Debinding on MIM Titanium Parts

P. Ewart¹, D. Zhang¹, S. Ahn^2
1University of Waikato (New Zealand), ²Pusan National University (Korea)

15B-T5-5Cancelled

15B-T5-6

Tungsten-Copper / Stainless Steel Bi-Material Parts by 2C-MIM

M. Mulser, Th. Hartwig, F. Petzoldt
Fraunhofer IFAM Bremen (Germany)

15B-T5-7

Development of a Powder Co-Injection Molding Process for Ceramic-Metal Joints

S. S. Han¹, S. J. Jeong², S. J. Park^1
1Pohang University of Science and Technology (POSTECH), ²LG Electronics Inc (Korea)

15B-T5-8

Powder Injection Molding – New Developments In Metals and Ceramics

M. Godin, J. Binay
Mate Consulting Ltd (China)

15C-T1-1

Microstructure Characterization of Rapidly Solidified Mg-Al-Zn-Nd Alloy Powders

H. J. Chae, S. W. Nam, T. B. Kim, B. S. Kim, T.-S. Kim
Korea Institute of Industrial Technology (Korea)

15C-T1-2

Development of a New Malleable Iron Powder Grade

F. Chagnon, C. Coscia
Rio Tinto Metal Powders (Canada)

15C-T1-3

Influence of Substrate Temperature on Structure and Adhesion Strength of Fe-Cr-P-C Amorphous Coating Films Produced by Thermal Spraying Technique

T. Mimura¹, M. Komaki¹, R. Kurahashi¹, H. Odahara², K. Amiya², Y. Saotome², T. Yamasaki^3
1Nakayama Steel Works,Ltd., ²Tohoku University, ³University of Hyogo (Japan)

15C-T1-4

Calculation and Observation of Flying Trajectories during Centrifugal Atomizing

C. Wang
Institute of Metal Research, Chinese Academy of Sciences (China)

15C-T1-5Cancelled

15C-T1-6

Experimental Characterization of Water Jets for Melt Atomization and Their Impact on Powder Properties

M. Pasupathy, J.M. Martín, A. Rivas, I. Iturriza, F. Castro
CEIT and TECNUN (University of Navarra) (Spain)

15C-T1-7

Determination and Prediction of the Nucleation Kinetics of Traveling Mono-size Copper Droplets

M. B. Islier¹, T. Ando¹, S. Kumamoto², N. Chiwata^2
1Northeastern University (USA), ²Hitachi Metals, Limited (Japan)

15C-T1-8

Surface Oxides on Gas and Water Atomized Steel Powders

L. Nyborg, E. Hryha
Chalmers University of Technology (Sweden)

15D-T1-9

Development of Fine Grain Size Tungsten Carbide Particles Using Chemical Complex Solution Process

S. Ueno¹, Y. Maeda¹, M. Nagano¹, Y. Yamashita², T. Harada^2
1Nippon Tungsten Co., LTD., ²Fukuoka Industrial Technology Center (Japan)

15D-T1-10

Microstructure and Properties of Ultrafine Cemented Carbides Prepared by In-situ Synthesis and Sinter-HIP

C. Wei, X. Song, J. Fu, X. Liu, H. Wang, Y. Gao
Beijing University of Technology (China)

15D-T1-11

Development of Environmental Load-Reducing and High Efficient W Recycling Process from Cemented Carbide Scraps by Molten Salt Oxidation and Ion Exchange Treatments

A. Ikegaya¹, K. Sasaya¹, S. Yamanaka¹, F. Satoh¹, T. Itakura¹, Y. Yamamoto¹, H. Itoh^2
1A.L.M.T.Corp., ²Raremetal Recovery Institute, Inc. (Japan)

15D-T1-12

Continuously Manufactured Fine Copper Powder by Using Electrolytic Chemical Reduction Process

J. Wada, S. Masuoka, K. Hirose, M. Hanafusa, Y. Arami
Fukuda Metal Foil & Powder Co., Ltd. (Japan)

15D-T1-13

Microstructure and Mechanical Properties of Mg-Li Alloy Consolidated by Powder Metallurgy Methods

H. J. Chae, S. W. Nam, T. B. Kim, B. S. Kim, T.-S. Kim
Korea Institute of Industrial Technology (Korea)

15D-T1-14

Microstructure, Physical Property and Applications of Nonferrous Metal Powders

S. Huo¹, E. Wolfsgruber², M. Barr^1
1SCM Metal Products Inc. (USA), ²Ecka Granules Austria (Austria)

15D-T1-15

New Surface Treatment of Carbon Materials Using PM Process

J.-F. Silvain¹, P. Richard¹, J.-M. Heintz¹, J.-L. Diot², G. Lacombe², R. De Langlade^2
1CNRS, Universite de Bordeaux, ICMCB, ²NOVAPACK (France)

15D-T1-16Cancelled

15E-T2-1

Strain Rate Effects on Constitutive Properties of High Velocity Pressed Iron Powder

M. Nishida¹, H. Kato1, H.-Å. Häggblad², P. Jonsén², G. Gustafsson^2
1Nagoya Institute of Technology (Japan), ²Luleå University of Technology (Sweden)

15E-T2-2

Cold Compaction Behavior of Nano-structured NdFeB Alloy Powders Prepared by Different Processes

L. Hu, X. Liu, E. Wang
Harbin Institute of Technology (China)

15E-T2-3Cancelled

15E-T2-4

Development of Powder Compacting Machine Driven by Servo Motor Using Cross-coupled Control

S. Kasai, M. Furuya, T. Yoshihara
Kobayashi Industry Co.,Ltd. (Japan)

15E-T2-5

The Application of Response Surface Methodology for the Optimization of Compaction Parameters in the Cu-Al2O3 Composite

N. Parvin¹, A. Doryab^2
1Amirkabir University of Technology, ²University of Tehran (Iran)

15E-T2-6

Development of High Density Compaction Method

K. Hasegawa, Y. Hirai, S. Morinaga
Aida Engineering, Ltd. (Japan)

15E-T2-7

Influence of the Green Characteristics on the Geometrical Features of Stainless Steel Parts Sintered at High Temperature

I. Cristofolini¹, M. Pilla¹, G. Pederzini², A. Rambelli², S. Libardi³, A. Molinari^1
1University of Trento, ²Sacmi Imola, ³TFM (Italy)

15E-T2-8

Development of New Powder Compacting Process Suitable for Ultra Micro Products

N. Murasugi, Z. Ishijima
Hitachi Chemical Co., Ltd. (Japan)

15F-T14-1

Effects of Oxide Particles on the Recovery in Iron Powders for Soft Magnetic Composites

K. Nishi, Y. Aono
Hitachi, Ltd. (Japan)

15F-T14-2

3-D Soft Magnetic Composite Core Superior in the Downsizing of Motors

S. Sato¹, S. Takeguchi¹, A. Matsuo¹, T. Ishikawa^2
1Nippon Piston Ring Co., Ltd., ²Gunma University (Japan)

15F-T14-3

High Frequency Dependence of the Permeability by Si Addition on Fe-Ni Alloy Soft Magnetic Powders

M. Fukuda¹, K. Kume¹, Y. Matsushita², F. Kino^1
1Mitsubishi Steel Mfg. Co., Ltd. (Japan), ²MSM (THAILAND) Co., Ltd. (Thailand)

15F-T14-4

Development of Low Iron-Loss Soft Magnetic Powder Core for High Frequency Application

A. Watanabe, T. Ishimine, T. Tokuoka, K. Matsunuma
Sumitomo Electric Industries, Ltd. (Japan)

15F-T14-5

Heat Treatment Effect on Soft Magnetic Properties of Fe-Based SMC

Y. Pittini-Yamada¹, T. Mennik,² B.T.T. Chu², C. Meyer¹, R. Pittini^2
1Meyer Sintermetall AG, ²Maxon Motor AG (Switzerland)

15F-T14-6

Influence of Oxidation Depth on Strength of Soft Magnetic Iron Core for Electric Motors

M. Hosokawa, M. Takeda, W. Urushihara
Kobe Steel, Ltd. (Japan)

16A-SIS2-1 [SPECIAL INVITED]

Powder Metallurgical Superiorty of the Nd-Fe-B Sintered Magnet

M. Sagawa
Intermetallics Co., Ltd. (Japan)

16A-SIS2-2 [SPECIAL INVITED]

Recent State and Future Aspect of SMC in Japan

K. Asaka
Asaka Professional Engineer Office (Japan)

16A-SIS2-3 [SPECIAL INVITED]

Design and Evaluation on Reactors for Powder
Conversion Circuits

M. Saito
Shibaura Institute of Technology (Japan)

16A-SIS2-4 [SPECIAL INVITED]

Status of SOFC Development and Technology in Japan

T. Yamamoto, M. Yoshikawa, Y. Mugikura
Central Research Institute of Electric Power Industry (Japan)

16A-SIS2-5

Development of Metal Supported Solid Oxide Fuel Cells (SOFC) for Future Energy Supply

M. Bram¹, S. Vieweger¹, M. Brandner², Th. Franco², N. H. Menzler¹, H. P. Buchkremer¹, D. Ströver^1
1Forschungszentrum Jülich GmbH (Germany), ²Plansee SE (Austria),

16A-SIS2-6 [SPECIAL INVITED]

Materials for Motors of Hybrid Vehicles

S. Konda
Toyota Motor Corporation (Japan)

16A-T9-1

High Toughness Steel Powder for Case Hardening

M. Yoshida, S. Arima
Kobe Steel, Ltd. (Japan)

16A-T9-2

Contact Fatigue Properties of Lean Alloyed Sintered Steel

Y. Tsukamoto¹, T. Okuda¹, N. Hirose², T. Koide^3
1Sumitomo Electric Sintered Alloy, LTD., ²Höganäs Japan KK,
³Tottori University (Japan)

16A-T9-3

Surface Durability Test and Contact Stress Analysis of 1.5Cr-0.2Mo High Density Sintered Steel Gear

T. Takemasu¹, T. Koide², Y. Takeda³, T. Shinbutsu^4
1Tokyo University of Science, ²Tottori University, ³Höganäs Japan K.K. (Japan), ⁴Nissei Co., Ltd.

16A-T9-4Cancelled

16A-T9-5

A Synthetic Haigh Diagram For Structural Sintered Steels

S. Keusemann, C. Broeckmann, P. Beiss
RWTH Aachen University (Germany)

16A-T9-6

Effect of Graphite Particle Shape on Static and Dynamic Properties of Malleable Iron Powder Materials

F. Chagnon, M. Moravej, J. Campbell-Tremblay
Rio Tinto Metal Powders (Canada)

16A-T9-7Cancelled

16A-T9-8

Development of the High Strength Sintered Material Used Cr Pre-alloyed Powder

Y. Yamanishi, T. Tsutsui
Hitachi Powdered Metals Co.,Ltd. (Japan)

16A-T9-9

Comparison between Sinterhardened PM Steels Obtained from, Both, Diffusion Bonded and a Lean Cr-containing Powder

S. Bueno¹, S. Saccarola², S. Sainz³, A. Veiga³, F. Castro³, F. Castro^3
1POMETON (Spain), ²POMETON SpA (Italy), ³CEIT and TECNUN (University of Navarra) (Spain)

16A-T9-10

Development of Powder Forged Connecting Rods Using Chromium Alloyed Iron Powders

M. Kim¹, B.-C. Kang¹, H.-S. Kim², K.-J. Kim², D. Jang^3
1Sinteron Co., Ltd., ²Hyundai & Kia Motor, Co., ³Hoganas Korea Ltd. (Korea)

16A-T9-11

Effect of Carbon Source on Oxide Reduction in Cr-Prealloyed PM Steels

E. Hryha¹, L. Nyborg², L. Alzati^2
1Chalmers University of Technology (Sweden)
²TIMCAL Ltd. (Switzerland)

16A-T9-12

Effect of Processing Parameters on Oxide Transformationin Cr-Mn-Prealloyed Sintered Steels

E. Hryha, L. Nyborg
Chalmers University of Technology (Sweden)

16B-T5-9

Injectibility of Nano-Size Yttria Stabilized Zirconia with Palm Stearin Based Binder for Micro Powder Injection Molding

F. Foudzi¹, N. Muhamad¹, A. B. Sulong¹, H. Zakaria¹,², F. Abdullah^1
1Universiti Kebangsaan Malaysia, ²Universiti Malaysia Perlis (Malaysia)

16B-T5-10Cancelled

16B-T5-11

Effect of Nano Powder on Densification and Grain Growth in Sintering of PIMed Micro-Nano Powders

W.-K. You, J.-P. Choi, S.-M. Yoon, J.-S. Lee
Hanyang University-ERICA (Korea)

16B-T5-12

Micro Precision Parts Produced by Powder Injection Molding

V. Piotter, E. Honza, A. Klein, T. Mueller, K. Plewa
Karlsruhe Institute of Technology (KIT), Institute for Applied materials (IAM-WPT) (Germany)

16B-T5-13

Porous 430L Supports for SOFC Obtained by Powder Extrusion Moulding Employing PMMA as a Powder Space Holder

M. E. Sotomayor, A. Várez, B. Levenfeld
Carlos III University of Madrid (Spain)

16B-T5-14

Characterization of 430L Porous Metallic Supports Obtained by Powder Extrusion Moulding for their Application in Solid Oxide Fuel Cells

M. E. Sotomayor¹, L. M. Ospina¹, J. Canales², A. Várez¹, B. Levenfeld^1
1Carlos III University of Madrid, ²Castilla-La Mancha University (Spain)

16B-T5-15Cancelled

16B-T5-16

Influences of Powder Characteristics on Sintering Behavior of Martensitic Stainless Steel by Metal Injection Molding Process

H. Nakayama¹, H. Kyogoku^2
1Castem Co., Ltd., ²Kinki University (Japan)

16B-T5-17

Powder Injection Molding of SS316L/HA Composite: Rheological and Mechanical Properties of Green Part

M. I. Ramli, A. B. Sulong, N. Muhamad, A. Muchtar
Universiti Kebangsaan Malaysia (Malaysia)

16B-T5-18Cancelled

16B-T5-19

Fe2.7Si, Fe50Ni and Fe50Co Soft Ferromagnetic Materials by Powder Injection Moulding

E. Carreño-Morelli, M. Rodriquez-Arbaizar, H. Girard, H. Hussein, R. Herzog
University of Applied Sciences Western Switzerland (Switzerland)

16B-T5-20

Fabrication of Ni- and Fe-Based Superalloy by MIM and their Properties

B. Klöden¹, U. Jehring¹, T. Weißgärber¹, B. Kieback¹, I. Langer², R. W.-E. Stein^2
1Fraunhofer IFAM Dresden, ²Schunk Sintermetalltechnik GmbH (Germany)

16B-T5-21

Evaluation of Heterogeneous Microstructure for Ultrahigh
Strengthening MIM Sintered Low Alloy Steels

W.S.W. Harun, T. Osada, H. G. Kang, F. Tsumori, H. Miura Kyushu University (Japan)

16B-T5-22Cancelled

16B-T5-23

Distortion of Large and Complex Shaped Ti and Ti-6Al-4V Alloy Compacts by Metal Injection Molding Process

S. Virdhian, T. Osada, H. G. Kang, F. Tsumori, H. Miura
Kyushu University (Japan)

16B-T5-24

Development of PIM Process based on Re Alloy for Non-Eroding Rocket Nozzle Throat

D. Y. Park¹, Y. S. Kwon³, Y. J. Oh², S. T. Lim⁴, S. J. Park^1
1Pohang University of Science and Technology (POSTECH),
²Hanbat National University, ³CetaTech, Inc., ⁴Agency for Defense Development (Korea)

16B-T5-25

Properties of Metal Injection Moulded Parts for Medical Applications using Gas-atomised Powder

A. Coleman², J. Sundström¹, K. Murray^2
1Sandvik Osprey Ltd. (UK), ²Sandvik Machining Solutions (Sweden)

16C-T1-17

Improving Product Quality through Powder Handling System Design

R. A. Barnum, B. H. Pittenger
Jenike & Johanson, Inc. (USA)

16C-T1-18

A Property of New Pre-mix Powder Providing Improved Flowability and Homogeneity

N. Akagi, H. Suzuki, S. Arima
Kobe Steel, Ltd (Japan)

16C-T1-19

Introduction of Carbon into Sintered Steels through Different Masteralloy Routes

C. Gierl, H. Gschiel, E. Englerth, H. Danninger
Vienna University of Technology (Austria)

16C-T1-20

A Novel Process of Partially Alloyed Iron Powder with Anti-segregation and High Compressibility

J.-P. Choi¹, J.-C. Yun¹, K.-H. Kim², J.-S. Lee^1
1Hanyang University-ERICA, ²Hyundai Steel Company (Korea)

16C-T1-21

Synthesis by Mechanical Alloying and Characterization of Composites of High Speed Steel M-2 with Insertion of Niobium Carbides

R.S. Brito¹, S.O. Albuquerque¹, L. Manzato¹, S.L.M. Queiroga¹, M.F. De Oliveira^2
1IFAM/CMDI, ²USP/EESC (Brazil)

16C-T1-22

Fabrication of Fine Grained Hot Work Tool Steel by Mechanical Milling and Spark Plasma Sintering

A. Fedrizzi¹, M. Pellizzari¹, M. Zadra², F. Dies^1
1University of Trento, ²K4sint (Italy)

16C-T1-23

Novel Mechanochemical Process for Environmentally Friendly Synthesis of Crystalline Magnetite Nanoparticles

T. Iwasaki, N. Sato, H. Nakamura, S. Watano
Osaka Prefecture University (Japan)

16C-T1-24

Grinding Characteristics and Mechanical Alloy of Multi-Walled Carbon Nanotubes and Metal Powders during a Various Ball Milling Process

H. Choi¹, J. Lee¹, W. Lee¹, M. Batmunkh², H. Chung², H. Jeong², Y. Kim²,
S. Huh², S. Kim², B. Ochirkhuyag^3
1Changwon National University, ²Gyeongsang National University (Korea),
³National University of Mongolia (Mongolia)

16C-T1-25

Synthesis by Mechanical Alloying and Characterization of 96.5Sn-3.0Ag-0.5Cu (wt%) Nanopowder

S.O. Albuquerque¹, L. Manzato¹, J.P.R. Bustamante², M.F. De Oliveira², S.M. Souza^3
1IFAM/CMDI, ²USP/EESC, ³UFAM/IF (Brazil)

16C-T2-9

Breakthrough Concept for the Integration of Multi-level Tools in Servo-driven Compacting Presses

M. Mittnacht
Dorst Technologies GmbH & Co KG (Germany)

16C-T2-10

Control of Delubrication Process for PM Components Based on Prealloyed Steel Powders

E. Hryha, S. Karamchedu, L. Nyborg
Chalmers University of Technology (Sweden)

16C-T2-11

Sintering Characteristics of the Granulated Powder Using Super Fine Powder

Y. Maeda, Y. Kudo, I. Otsuka
Epson Atmix Corporation (Japan)

16C-T2-12

Aluminum Composite Powder Consolidation via Equal Channel Angular Pressing (ECAP)

R. D. Haghighi¹, A. J. Jahromi^2
1Islamic Azad University, ²Shiraz University (Iran)

16C-T2-13

Improving Compaction Performance and Compact Quality through Advanced Powder Mixes and Latest Press Technologies

M. Larsson¹, E. Schneider¹, R. Menzel², M. Mittnacht^2
1Höganäs AB (Sweden), ²Dorst Technologies (Germany)

16C-T2-14

Improved Powder Performance through Binder Treatment of Premixes

C. T. Schade, M. Marucci
Hoeganaes Corporation (USA)

16C-T2-15Cancelled

16C-T2-16

High Performance Lubricants for Conventional Medium Density Compaction

V. Paris¹, Y. Thomas², S. St-Laurent^1
1Rio Tinto Metal Powders, ²National Research Council (Canada)

16C-T2-17

Performance of Lubricants for High Density Applications

S. St-Laurent¹, V. Paris¹, Y. Thomas^2
1Rio Tinto Metal Powders, ²National Research Council (Canada)

16C-T2-18

A Study of the Compressive Behavior of Iron Powders in the Low-Pressure Region

Y. Ito¹, E. Yoshikawa¹, A. Kawasaki², N. Yodoshi^2
1Kobe Steel,Ltd, ²Tohoku University (Japan)

16C-T2-19Cancelled

16C-T2-20

The Development of an Advanced Die Wall Lubricating Compaction

S. Onodera, A. Hamano, K. Oofuji
Hitachi Powdered Metals Co., Ltd. (Japan)

16D-T3-1

Direct Induction Sintering of Nickel Powder

A. Guyon, J. M. Chaix, C. P. Carry, D. Bouvard
Grenoble INP/CNRS/UJF (France)

16D-T3-2

Influence of Composition and Processing Conditions on the Microstructure and Properties of Astaloy CrA

R. Frykholm, O. Litström
Höganäs AB (Sweden)

16D-T3-3

Improving the Properties of Un-alloyed Iron PM Parts by a Gas Alloying Process without Rapid Cooling

N. Gopinath¹, V. Raghunathan¹, S. Sriram^2
1Fluidtherm Technology, ²Sundram Fasteners Ltd. (India)

16D-T3-4

Development of Synchronizer Hub by Mild Sinter Hardening Process

H. Terai, Y. Tsuchiya, K. Inoue
Sumitomo Electric Sintered Alloy, Ltd. (Japan)

16D-T3-5

Relations between Density, Surface Area, and Grain Size during Sintering

R. M. German¹, J. V. Kumar^2
1San Diego State University (USA), ²Mahatma Gandhi Institute of Technology (India)

16D-T3-6

Fundamental Research on Sintering Behavior of Iron Powder with Various Additives

J. Hojo¹, T. Kiyonaga¹, H. Hara¹, T. Kawano², Y. Ozaki^2
1Kyushu University, ²JFE Steel Corporation (Japan)

16D-T3-7

Densification and Distortion of Tungsten Alloys Using Copper-Nickel-Manganese

T. H. Young¹, W. Li^1,2, E.Olevsky¹, D. Whychell³, R. M. German^1
1San Diego State University, ²University of California San Diego, ³CM Furnace (USA)

16D-T3-8

Preparation of High-precision Ultrafine Component by Nanopowder Processing

S.-J. Son, Y.-S. Cho, C.-J. Choi
Korea Institute of Materials Science (Korea)

16D-T3-9

Computer Simulation Studies on Sintering and Grain Growth for Microstructure Design of Sintered Materials

H. Matsubara^1,2
1Japan Fine Ceramics Center, ²Nagoya Institute of Technology (Japan)

16D-T3-10

Computational and Experimental Study for Grain Growth of Sintered Ceramics Composite

Y. Kojima¹, T. Matsuda², H. Matsubara¹,^2
1Nagoya Institute of Technology, ²Japan Fine Ceramics Center (Japan)

16D-T3-11

Computational Modeling for Porous Structure of Aerogel Using the Grain Growth Simulation

K. Otsu¹, H. Matsubara¹,², M. Nogami^1
1Nagoya Institute of Technology, ²Japan Fine Ceramics Center (Japan)

16D-T3-12

Modeling the Microstructural Evolution During Constrained Sintering

R. Bjørk¹, H. L. Frandsen¹, V. Tikare², N. Pryds^1
1Technical University of Denmark (Denmark), ²Sandia National Laboratory (USA)

16D-T3-13

Sintering of Multi-Layered Powder Composites

E. Olevsky¹, V. Esposito², H. Frandsen², R. Bjørk², N. Pryds^2
1San Diego State University (USA), ²Technical University of Denmark (Denmark)

16D-T3-14

Mechanics of Sintering for Coupled Grain Boundary and Surface Diffusion

F. Wakai¹, K.A. Brakke^2
1Tokyo Institute of Technology (Japan), ²Susquehana University (USA)

16D-T3-15

Sintering of Silver-based Composites: Effects of Refractory Reinforcement and Process Parameters

E. Biguereau¹, D. Bouvard¹, J.-M. Chaix¹, S. Roure^2
1Laboratoire SIMap, ²Schneider Electric (France)

16D-T3-16

Improved Modeling Approaches for Constrained Sintering of Bi-Layered Porous Structures

H. L. Frandsen¹, D. W. Ni¹, T. T. Molla¹, V. Esposito¹, E. Olevsky², N. Pryds¹, R. Bjørk^1
1Technical University of Denmark (Denmark), ²San Diego State University (USA)

16D-T3-17

Study of Anisotropy during Sintering of Ferrous Alloys

C. Menapace¹, M. Larsson², E. Torresani¹, I. Cristofolini¹, A. Molinari^1
1University of Trento (Italy), ²Höganäs AB (Sweden)

16D-T3-18

Reduction Effects During Sintering of Cr and Mn Alloy Steel Compacts

C. Gierl, H. Danninger
Vienna University of Technology (Austria)

16D-T3-19

Densification Kinetics of Silicon Powder Compacts in the Presence of a Stabilized Silica Layer at the Particle Surface

J. M. Lebrun, C. Pascal, J. M. Missiaen
Grenoble INP – UJF – CNRS (France)

16E-S1-1 [KEYNOTE]

Effective Use of Waste Heat by Thermoelectics

R. Funahashi
National Institute of Advanced Industrial Science & Technology (AIST) (Japan)

16E-S1-2 [KEYNOTE]

Nano to System: Thermoelectric Activities in Korea

S.-D. Park, M. W. Oh, B.-S. Kim, B.-K. Min, H-W. Lee
Korea Electrotechnology Research Institute (Korea)

16E-S1-3

Structure and Thermoelectric Properties of Pd/Ca_0.9Yb_0.1MnO₃ Nanocomposites Prepared by Electroless Plating

A. Kosuga, M. Matsuzawa
Osaka Prefecture University (Japan)

16E-S1-4

Thermoelectric Properties of Nitrogen-Containing Magneli Phase Titanium Oxides

M. Mikami, K. Ozaki
National Institute of Advanced Industrial Science and Technology (AIST) (Japan)

16E-S1-5

Fabrication and Characterization of Bi_0.4Sb_1.6Te₃ Thick Films by Aerosol Deposition

S. Baba, L. Huang, H. Sato, R. Funahashi, J. Akedo
National Institute of Advanced Industrial Science and Technology (AIST) (Japan)

16E-S1-6

Fabrication of Bi_0.4Sb_1.6Te₃ Bulk Thermoelectric Materials by Mechanical Alloying and Hot Extrusion Processes

T. Akao¹, Y. Nagami¹, A. Miyagawa², T. Onda¹, Z.-C. Chen^1
1Tottori University, ²Japan Advenced Institute of Science and Technology (Japan)

16E-S1-7

Thermoelectric Properties of TiS₂-intercalation Compounds

C. Wan¹,², Y. Wang¹, K. Koumoto¹,^2
1Nagoya University, ²CREST, Japan Science and Technology Agency (Japan)

16E-S1-8

Fabrication of Thermoelectric Thin-film Device Using Pulsed Current Sintering Process

K. Kobayashi
National Institute of Advanced Industrial Science and Technology (AIST) (Japan)

16E-S1-9

Thermoelectric, Mechanical, and Thermal Properties of Polycrystalline Type-I Ba₈Al_xSi_46-x (Nominal x=15-17) Clathrates

H. Anno¹,², M. Hokazono¹, R. Shirataki¹,², Y. Nagami¹,^2
1Tokyo University of Science, ²JST CREST (Japan)

16E-S1-10

Synthesis of Sintered Thermoelectric Materials with Bimodal Distribution of Crystal Grain Size and Investigation of their Thermoelectric Properties

S. Katsuyama, F. Maezawa, T. Tanaka
Osaka University (Japan)

16E-S1-11

Thermoelectric Properties of (Ga, TI) Doubled-Filled Skutterudites

K. Kurosaki¹, A. Harnwunggmoung^1,2, Y. Ohishi¹, H. Muta¹, S. Yamanaka^1,3
1Osaka University (Japan), ²Rajamangala University of Technology Suvarnabhumi (Thailand), ³University of Fukui (Japan)

16E-S1-12

Microstructure and Thermoelectric Properties of ZnIn18XSb20 (X = Si, Ge, Sn, or Pb)

D. Kim¹, K. Kurosaki¹, Y. Ohishi¹, H. Muta¹, S. Yamanaka¹,^2
1Osaka University, ²University of Fukui (Japan)

16E-S1-13

Compositional Change during Sputtering of (Ti, Zr) NiSn and NbNiSn Thin Films on Different Substrates for Thermoelectric Applications

W. Wunderlich, A. Koori, Y. Matsumura
Tokai University (Japan)

16E-S1-14

Transition Metal Substitution of MnSiγ Synthesized by MG-SPS Method

Y. Kikuchi, Y. Miyazaki, T. Nakajo, K. Hayashi
Tohoku University (Japan)

16E-S1-15

Development of Eco-Friendly Thermoelectric Silicide Compounds and Modules for Energy Harvesting

T. Itoh, K. Nishigata
Nagoya University (Japan)

16E-S1-16

Development of Miniature Thermoelectric Generation Modules Composed of Linked-Sphere Elements

K. Takagi, K. Ozaki
National Institute of Advanced Industrial Science and Technology (AIST), (Japan)

16E-S1-17

Optimization of Design in Cascade-Type Thermoelectric Module

R. O. Suzuki^1,2, T. Fujisaka^1
1Hokkaido University, ²JST-CREST (Japan)

16F-T14-7

Improvement of Hysteresis Loss of MgO-based Insulation Coated Powder Core

K. Mori¹, Y. Tanaka¹, K. Kato¹, M. Miyahara¹, K. Igarashi², M. Watanabe^2
1Diamet Corporation, ²Mitsubishi Materials Corporation (Japan)

16F-T14-8

Improvement of DC Bias Characteristics of High-Density Powder Magnetic Cores

K. Kato, N. Kobayashi, K. Mori, M. Miyahara
Diamet Corporation (Japan)

16F-T14-9

A New Generation of SMC Materials with Low Core Loss

Z. Ye, M. Lenberg, C. Pompermaier
Höganäs AB (Sweden)

16F-T14-10

Effect of Particle Size and 2P2C Technology on the Soft Magnetic Properties of Composite Iron Compacts

K. S. Narasimhan, M. L. Marucci, F. Hanejko
Hoeganaes Corporation (USA)

16F-T14-11

Influence of Particle Size on Core Loss in Dust Cores for High Frequency Application

T. Kamijo, H. Hojo, H. Mitani, S.Arima Kobe Steel, Ltd (Japan)

16F-T14-12

Development of High Performance Powder Magnetic Core

T. Inagaki¹, T. Shimoyama², C. Ishihara¹, T. Maruyama^2
1Hitachi Powdered Metals Co., Ltd., ²Hitachi Chemical Co., Ltd. (Japan)

16F-T14-13

Development of Cr-Cu Heat-sink(J-C'CREP®) for Semiconductor Device

H. Terao¹, H. Kobiki², H. Ota², K. Tanabe³, T. Itoh⁴, N. Kanetake^4
1JFE Precision Corporation, ²JFE Steel Corporation, ³Tanabe Press Corporation,
⁴Nagoya University (Japan)

16F-T14-14

New A -Site-ordered Perovskite-Structure Oxides with Intriguing Functional Properties

Y. Shimakawa, W.-T. Chen, T. Saito
KyotoUniversity and JST-CREST (Japan)

16F-T14-15

Material Design, Synthesis and Magnetic Properties of Novel A -Site-Ordered Perovskites AMn₃Al₄O₁₂

T. Tohyama, T. Saito, Y. Shimakawa
Kyoto University (Japan)

16F-T14-16

Viscosity Model of Magnetic Powder Mixtures for Magnetic PIM

S. H. Kim¹, S. J. Kim², J. H. Mun², T. G. Kang³, J. M. Park¹, S. J. Park^1
1Pohang University of Science and Technology (POSTECH)
²Andong National University, 3Korea Aerospace University (Korea)

16F-T14-17

Fabrication of Dense Magnetic-Metal/Oxide Composites for Induction Heating (IH) Applications Using N2-Atomized Iron Based Particles and MgO Powder

K. Hirota, A. Ogawa, T. Shimoyama, Y. Nakaguchi, M. Kato
Doshisha University (Japan)

16F-T14-18

Epitaxial Growth of Brownmillerite-structure Sr_1-xLa_xFeO_2.5 Thin Films

K. Hirai¹, D. Kan¹, N. Ichikawa¹, Y. Shimakawa^{1, 2
1}Kyoto University, ²JST-CREST (Japan)

16F-T14-19

Superconductivity and Itinerant Magnetism in Layered Fe-Chalcogenide and Co-Pnictide Systems

K. Yoshimura¹, C. Michioka¹, H. Ohta^2
1Kyoto University, ²Tokyo University of Agriculture and Technology (Japan)

16F-T14-20

Copper / Carbon NanoTubes (CNT) Composite for Advanced Materials with Interesting Electrical Properties

G.M. Vallet¹, M. Dunand², L. Ybanez², J.F. Silvain^1
1CNRS, Universite de Bordeaux, ICMCB, ²Safran Engineering Services – Labinal (France)

16F-T14-21

Synthesis and Magnetic Properties of a Layered Perovskite Sr₂VO₄

K. Nawa¹, K. Yoshimura¹, M. Yoshida², M. Takigawa², H. Ueda^1
1Kyoto University, ²University of Tokyo (Japan)

16F-T14-22

Development of Mg2Si / SiGe Hybrid Thermoelectric Module for High Temperature Heat Sources

T. Jinushi, Z. Ishijima
Hitachi Chemical Co., Ltd. (Japan)

16F-T14-23

Superconductivity and Pseudopotential Radii

Y. Makino, K. Yoshimura
Kyoto University (Japan)

P-T1-1

Production of Fine Stainless Steel Powder by High-pressure Water Atomization

G. Huo, X. Kuang, C. Kuang, F. Ding
Advance Technology & Materials Co., Ltd (China)

P-T1-2

Progress in Production Controlling System of Atomized Aluminium Powder

Z. Haiping, W. Bing, L. Xianxin, B. Li
YUELONG Superfine Metal Co.,Ltd (China)

P-T1-3

Sintering Ni-Si-C Alloys Using SiC as Alloying Element Carrier

J. P. Nicodemo¹, A. E. Martinelli¹, R. M. Nascimento¹, A. N. Klein², I. C. M. Mocellin²,
L. L. B. Amorim^2
1Universidade Federal do Rio Grande do Norte, ²Universidade Federal de Santa Catarina (Brazil)

P-T1-4

Synthesis of TiC from TiO₂ and Carbon Black

T. H. Vu^1,2, L. Q. Tran², K. Q. Dang², B. N. Duong², H. L. Vu^2,3
1Hanoi University of Science, ²Hanoi University of Science and Technology,
³Thai Nguyen University of Technology (Vietnam)

P-T1-5Cancelled

P-T1-6

Preparation of ODS Fe-base Powder by Hydrogen Reduction Method from a self-propagating Combostion Synthesis Precursor

C. Chen, Z. Guo, J. Luo, W. Yang, Y. Sui, W. Wang
University of Science and Technology Beijing (China)

P-T1-7

Nano-structured 7075 Alloy Produced by Mechanical Alloying

J. Li^1,2, H. Lei^1,2, B. Yan^1,2, W. Lu^1,2
1Tongji University, ²Shanghai Key Lab. of D&A for Metal-Functional Materials (China)

P-T1-8

Structural Study and Hydrogen Sorption Properties of Mechanically Milled MgH₂

T. Shigematsu, K. Itoh, M. Naito, N. Machida
Konan University (Japan)

P-T1-9Cancelled

P-T1-10

Fe-Fe₃Al Materials Prepared by Mechanical Alloying and Spark Plasma Sintering

Y. Chang, C. Jia, Z. Cui, C. Wang, D. Liang
University of Science and Technology Beijing (China)

P-T1-11

Influence of Ionic Liquids on Ball Milling Process

D. Shiba, E. Ymasue, H. Okumura, K. N. Ishihara
Kyoto University (Japan)

P-T1-12

Aluminum Powder Milled Under Ammonia Gas Flow

J. Cintas¹, E.S. Caballero¹, M. Herrera-Garcia¹, J.M. Montes¹, F.G. Cuevas^2
1University of Seville, ²University of Huelva (Spain)

P-T1-13

Amorphous Fe-Ni-(B) Powders Consolidation by Electrical Resistance Sintering

P. Urban¹, F.G. Cuevas², J.M. Montes¹, J. Cintas^1
1University of Seville, ²University of Huelva (Spain)

P-T1-14Cancelled

P-T1-15Cancelled

P-T1-16

Magnetic Properteis of Co-Zn-Mn-P Alloy Powders Produced by Chemical Reduction

T. Saito
Chiba Institute of Technology (Japan)

P-T1-17

Effect of Molybdenum Powder Mico-morphology on Properties of Molybdenum Sheet

G. An^1,2, R. Z. Liu², J. Li², F. Ding², J. Sun^1
1Xian Jiaotong University, ²Jinduicheng Molybdenum Co., Ltd. (China)

P-T1-18

Spheroidisation of Tungsten and Titanium Powders by RF Induction Plasma Processing

Y. Wang, J. Hao, Z. Guo
University of Science and Technology Beijing (China)

P-T1-19

Formation and Growth of Columnar-Shape W-Cu Oxide Particle

T. Liu, J. Fan, Y. Guo
Central South University (China)

P-T1-20Cancelled

P-T1-21Cancelled

P-T2-22Cancelled

P-T2-23

Compressibility and Sinterability Improvement of Cr Prealloyed Steel Powders by Controlling Particles Size Distribution

T. Mochidzuki¹, K. Iida¹, T. Fujima¹, N. Shiraki¹, K. Takagi¹, S. Unami², Y. Ozaki^2
1Tokyo City Unversity, ²JFE Steel Corporation (Japan)

P-T2-24

Die Wall Lubrication Behaviour of Internal Lubricant Powders in Uniaxial Iron Powder Compaction with DLC Coated Die

Y. Taniguchi, R. Fujii, K. Kodama
Nara National College of Technology (Japan)

P-T3-34Cancelled

P-T5-55Cancelled

P-T5-56

Metal Injection Molding of Tungsten and Its Applications for Electrodes

J. Song¹, M. Ouyang¹, Y. Yu¹, Z. Zhuang^2
1Xiamen Honglu Tungsten & Molybdenum Industry Co. Ltd, ²Xiamen Tungsten Co. Ltd. (China)

P-T5-57Cancelled

P-T5-58Cancelled

P-T5-59

Investigation of Biomechanical and Biosafety of Injection Moulded 316L Implant Materials

M.A.Omar¹, A.H.Zulkifly², N.Abdullah¹, N.M.Zainon¹, N.Roslani^1
1AMREC, ²International Islamic University Malaysia (Malaysia)

P-T5-60

Injection Molding of Tungsten Powder Treated by Jet Mill

M. Qin, R. Li, H. Huang, H. Lu, L. Zhang, H. Yin, X. Qu
University of Science and Technology Beijing (China)

P-T5-61

Mechanical Properties of Rene95 Superalloy Compacts by Metal Injection Molding

S. Morinaka, T. Osada, H. G. Kang, F. Tsumori, H. Miura
Kyushu University (Japan)

P-T5-63

Sintering Behavior of Micro Powder Injection Molded Components

W. Lee¹, J. M.Jang¹, B. Cha¹, S. C. Park¹, S. H. Son¹, S.-H. Ko^1
1Korea Institute of Industrial Technology, ²Samsung Electro- Mechanics Co., Ltd (Korea)

P-T5-64

Studies on the Electroforming of Ni Alloys for μ-Gear Mold

S. H. Son, S. C. Park, W. Lee, H. K. Lee
Korea Institute of Industrial Technology (Korea)

P-T6-66

Catalystic Properties of Platinum Nano Particle by Liquid Phase Reduction

J. H. Lee¹, J. W. Kim¹, M. H. Lee², Y. D. Kim^1
1Hanyang University, ²Korea Institute of Industrial Technology (Korea)

P-T6-68

Nano Reinforced Gamma TiAl- Al₂O₃ Composites Processing by SHS from Ti-Al-TiO₂ Powder Mixtures

R. L. Orban, D. Salomie, M. Orban, T. Lung
Technical University of Cluj-Napoca (Romania)

P-T6-69

Solventless Synthesis of Carbon-coated Ni and Fe Nanoparticles

L. Seinberg, S. Yamamoto, H. Kageyama, M. Takano
Kyoto University (Japan)

P-T6-70Cancelled

P-T6-71

Morphological and Structural Features of Bacteriaassociated Manganese Oxide

N. Kimura¹, H. Hashimoto¹, N. Miyata², M. Furutani¹,
M. Nakanishi¹, T. Fujii, J. Takada^1
1Okayama University, ²Akita Prefectural University (Japan)

P-T6-72

Micro Imprinting Process for Surface Patterning of Ceramic Sheet

F. Tsumori, S. Hashimoto, M. Takahashi, Y. Xu, H. Kang, T. Osada, H. Miura
Kyushu University (Japan)

P-T6-73

Pre-Sintering Effect to The Hybrid Nano - Micro Steel Powder for Metal Injection Molding Application

A. Tirta, E. Baek
Yeungnam University (Korea)

P-T7-76

Effect of Pre-sintering Temperature on Machinability of High-Strength Steel Powder Compacts

Y. Tanaka¹, S. Tsurimoto², K. Okimoto^2
1PRIMIX Co., ²Setsunan University (Japan)

P-T9-82Cancelled

P-T9-83

Gas Release Behavior of Iron and Alloyed Steel Powders by Gas Chromatograpy

A. Hibino
Toyama Prefectural University (Japan)

P-T9-84

Investigation of High Vanadium Tool Steel Powder from Gas Atomization

X. Li¹, H. Zhong¹, D. Xin², X. Kuang¹, I. Wu³, C. Kuang^1
1Advance Technology & Materials Co., Ltd, ²University of Science & Technology Beijing, ³Heye Special Steel Co., Ltd (China)

P-T9-85

Erosion and Corrosion Resistant Powder Materials in Liquid Fuel Atomizers for Steam Power Plant Equipment Boilers

A.Ph. Ilyushchenko, V.A. Osipov, L.N. Dyachkova
Powder Metallurgy Institute (Belarus)

P-T9-86

Effect of Heat Treatment on Microstructure of ODS Steel

W. W. Yang, Z. M. Guo, J. Luo, H. Q. Cao
University of Science and Technology Beijing (China)

P-T10-87

Microstructure and Properties of Spray-formed High Silicon Aluminum Alloy with RE Dopants

C. He, W. Lu, B. Yan
Tongji University (China)

P-T10-88

Microstructure and Mechanical Properties of FGH97 PM Superalloy

Y. Zhang, J. Liu, S. Han, J. Jia, Y. Zhang, Y. Tao
China Iron & Steel Research Institute Group (CISRI) (China)

P-T10-89

A New Method for Synthesizing Mo(CO)₆

N. Li, Y. Li, X. Liu, J. Huo
Central Iron and Steel Research Institute (China)

P-T10-90

Physical and Mechanical Properties of W-Cu Components Fabricated by Using Ultrafine Composite Powder

Y. Yu¹, J. Song¹, M. Oi¹, X. Zeng¹, Z. Zhuang^2
1Xiamen Honglu Tungsten & Molybdenum Industry Co. Ltd,
²Xiamen Tungsten Co. Ltd (China)

P-T10-91

Fabrication, Friction and Wear Properties of Aluminum Matrix Composites Reinforced by Molydenum-coated Carbon Nanotubes

Z. Cui, J. Nie, C. Jia, Y. Chang, C. Wang, D. Liang
University of Science and Technology Beijing (China)

P-T10-92

Wear Properites of Al-Si/SiC Aluminium Metal Matrix Composites (AMMCs) Prepared by Powder Metallurgy

J. G. Kim¹, J. I. Bang¹, S. M. Jo¹, Y. J. Cho1, Y. J. Kim², Y. H. Park^1
1Pusan National University, ²Korea Institute of Materials Science (Korea)

P-T10-93

Preparation and Properties of Superfine W3Ni2Fe Powders by a Novel Chemical Method

J. Cheng, Y. Fan, Y. Liu, L. Wan
Hefei University of Technology (China)

P-T10-94

Relationship between Plastic Deformability and Local Structure in Zr-based Ternary Bulk Metallic Glasses

R. Ito, Y. Takigawa, T. Uesugi, K. Higashi
Osaka Prefecture University (Japan)

P-T10-95

Effect of Brazing Condition and Precious Metal Coating on Wettability of Pd-based BMG on Ti

E. Miura-Fujiwara, H. Maenaka, T. Yamasaki
University of Hogo (Japan)

P-T10-96

Preparation of High Corrosion Resistance Ni-Mo-B Amorphous Alloys and their Thermal Spray Coatings

K. Amiya¹, T. Mimura², Y. Saotome¹, R. Kurahasi^2
1Kansai Center, Tohoku University, ²Nakayama Steel Works, Ltd. (Japan)

P-T13-103

Interfacial Diffusion of Cobalt Phase in the Cellular Cemented Carbide

T. Xu^1,2, Z. Zhang^1,2, H. Zhang^1,2, D. Kong^1,2, Y. Du³, K. Cheng³, S. Wang^3
1Zhuzhou Cemented Carbide Group Corp. Ltd., ²State Key Laboratory for Cemented Carbide,
³Central South University (China)

P-T13-104

Thermodynamic and Kinetic Databases of Cemented Carbides and their Applications to Microstructure Description

Y. Du^1,2, T. Xu¹, W. Zhang², S. Wang¹, Y. Peng², P. Zhou²,
W. Chen², H. Zhang¹, G. Wen¹, Z. Zhang^1
1State Key Laboratory of Cemented Carbides, ²Central South University (China)

P-T13-105

Microstructure and Properties of WC-Co Cemented Carbide Strengthened with Ni₃Al

J. Z. Long^1,2, Z. J. Zhang^1,2, T. Xu^1,2, X. Y. Wei^1,2, B. Z. Lu^1,2
1State Key Laboratory for Cemented Carbide, ²Zhuzhou Cemented Carbide Group Corp. Ltd. (China)

P-T13-106

Preparation of WC-MoC-SiC Ceramics by Pressureless Reaction Sintering and Their Mechanical Properties

C. Liu¹, A. Nino¹, S. Sugiyama², H. Taimatsu^1
1Akita University, ²Akita Industrial Technology Center (Japan)

P-T13-107

Determination the Correlationship between WC Grain Size and the Hardness of WC-Co Hardmetals

R. Cao, C. Lin, X. Xie
General Research Institute for Non-ferrous Metals (China)

P-T13-108

Study on Fracture of Fibrous Monolith Cemented Carbide

C. Ding, X. Liu, Y. Li, J. Huo
Central Iron and Steel Research Institute (China)

P-T13-109Cancelled

P-T13-110

Synthesis and Classification of WC and W by Controlling of Organic-Inorganic Hybrid Precursors

T. Onoki, Y. Ueoka, N. Shiota, H. Xu, Y. Naganuma, A. Matsuoka, Y. Minamibori, T. Tagami
Osaka Prefecture University (Japan)

P-T13-112

Effect of Co Content on the Microstructure and Mechanical Properties of TiC/TiB₂ Base Cermets

T. Usui, T. Teraoka, A. Momozawa, T. Fujima, N. Shiraki, K. Takagi
Tokyo City University (Japan)

P-T13-113

Structual and Grain size Dependence of Mechanical properties of Nano-polycrystalline Diamond

K. Arimoto, K. Harano, T. Satoh, H. Sumiya
Sumitomo Electric Industries, Ltd. (Japan)

P-T13-114

Properties and Application of Amorphous Powder for Diamond Tools

X. Luo, J. Wang, F. Wang, X. Shen, Y. Liu, G. Huo, X. Kuang
China Iron & Steel Research Institute Group, and Advance Technology & Materials Co., Ltd (China)

P-T13-115

Preparation of Cubic Boron Nitride from the Amorphous BN Precursor

T. Mochizuki¹, Y. Yamamoto¹, F. Kawamura², T. Taniguchi², Y. Sugahara^1
1Waseda University, ²National Institute for Materials Science (NIMS) (Japan)

P-T13-116

Influence of Rhenium on the Oxidation Properties of NiCoCrAlY Powder

S. Zhang, H. Wang
Beijing General Research Institute of Mining and Metallurgy (China)

P-T13-117Cancelled

P-T13-118

Oxidation Resistance and Corrosion Resistance of Molybdenum-Chromium Nitride

M. Nagae, N. Ise
Research Institute for Applied Science (Japan)

P-T15-135

Elaboration and Characterization of a Diamond Reinforced Al Matrix Composite for Heat Sink Application

Z. Tan¹, Z. Li¹, R. Shabadi², A. Addad², G. Ji², F. Housaer², D. Zhang^1
1Shanghai Jiao Tong University (China), ²Unité Matériaux et Transformations (France)

P-T15-136

Effect of Silver Ion Conductivity on Thermoelectric Properties of Ag₂Te

D. Jung¹, K. Kurosaki¹, Y. Ohishi¹, H. Muta¹, S. Yamanaka^1,2
1Osaka University, ²University of Fukui (Japan)

P-T15-137

Thermoelectric Properties of Indium-Filled Skutterudites: In_xCo₄Sb₁₂

G. Li¹, K. Kurosaki¹, Y. Ohishi¹, H. Muta¹, S. Yamanaka^1,2
1Osaka University, ²University of Fukui (Japan)

P-T15-138

Preparation and Properties of Nickel Ferrite - Copper - Nickel Composite with Interwoven Structure

Y. Tao, Z. Li, H. Xiong, K. Zhou
Central South University (China)

P-T15-139Cancelled

P-T15-140

Fibrous Porous Metals with High Porosity Used for Noise Contral

J. Zhu^1,2, H. Tang², A. Qingbo², J. Wang², J. Sun¹, Z. Sun^2
1Xi'an Jiaotong University, ²Northwest Institute for Nonferrous
Metal Research (China)

17A-T9-13

Effect of Copper Addition on Mechanical Properties of Sintered and Case-Hardened Compacts Made of Molybdenum Prealloyed Steel Powder

S. Unami, Y. Ozaki
JFE Steel Corporation (Japan)

17A-T9-14

Effect of Mezzo-heterogeneous Microstructure on the Mechanical Properties of Fe-Ni Sintered Alloy Steels

T. Hazama¹, T. Tokuoka², H. Kang¹, T. Osada¹, F. Tsumori¹, H. Miura^1
1Kyushu University, ²Sumitomo Electric Industries, Ltd. (Japan)

17A-T9-15

Effecf of Heterogeneous Microstructure on Mechanical Properties of Sintered Ni Alloy Steels

T. Tokuoka¹, T. Yamamoto², K. Kudo², F. Tsumori², T. Nishioka¹, H. Miura^1
1Sumitomo Electric Industries, Ltd., ²Kyusyu University (Japan)

17A-T9-16

Effect of Lubricant on Formation of Surface Stain of Sintered Steel

N. Hirose¹, Y. Takeda¹, S. Sunada^2
1Höganäs Japan K. K., ²Toyama University (Japan)

17A-T9-17

Comparing Compressive and Tensile Strength of Sintered Steels for Automotive Parts

A. Yoshida¹, A. Fujiki², N. Hirose^3
1Nissan Motor Co., Ltd., ²Shibaura Institute of Technology,
³Höganäs Japan K.K. (Japan)

17A-T9-18

Influence of Powder Particle Size on the Mechanical Properties of PM Low Alloyed Steels Obtained by Additions of Cu-Ni-Zn Master Alloy

E. Bernardo¹, M. Campos¹, R. Frykholm², O. Litström², JM. Torralba1,^3
1Universidad Carlos III de Madrid (Spain), ²Höganäs AB (Sweden),
³Institute IMDEA Materials (Spain)

17A-T9-19

Newly Developed Cu-Ni-Mo-Mn Low Alloyed Steel for PM Structural Parts

M. Zanon¹, S. Saccarola¹, I. Rampin¹, R. Durello^2
1Pometon Powder S.p.A., ²University of Padova (Italy)

17A-T9-20

Design of Low Cost High Performance Diffusion-alloyed Powders

J. Campbell-Tremblay, S. St-Laurent
Rio Tinto Metal Powders (Canada)

17A-T9-21

Master Alloys for High Strength PM Steels

A. Veiga, F. Castro
CEIT (Spain)

17A-T9-22

Influence of Densification Processes on Microstructure and Mechanical Properties of Fe-Mn-Si-C Sintered Steels

T. Miyake, N. Matsumoto, M. Kondoh
Toyota Central R&D Labs., Inc. (Japan)

17A-T9-23

Lean Steels in PM through the Use of Mn-Si Master Alloys:
Alloy Design and Sintering Performance

R. Oro¹, M. Campos¹, J. M. Torralba^1,2, C. Capdevila^3
1Universidad Carlos III de Madrid, ²IMDEA Materials Institute, ³Centro Nacional de Investigaciones Metalúrgicas (CENIM) (Spain)

17A-T9-24

Mechanical Properties of Mn-Si Low Alloy Sintered Steels Prepared through the Master Alloy Route

R. Oro¹, M. Campos¹, J. M. Torralba^1,2
1Universidad Carlos III de Madrid, ²IMDEA Materials Institute (Spain)

17A-T9-25

Lean Ferrous PM Alloys Provide Lower Cost Solutions for PM Parts

W. B. James, B. Lindsley, K. S. Narasimhan
Hoeganaes Corporation (USA)

17A-T9-26

Mechanical Properties of PM Alloy Systems with Silicon and Vanadium Additions

C. T. Schade¹, T. Murphy¹, A. Lawley², R. Doherty^2
1Hoeganaes Corporation, ²Drexel University (USA)

17A-T9-27

High Temperature Properties of Ferritic Stainless Steel with Aluminum Additon Consolidated from Metal Powder Produced by Vaccum Melting – Gas Atomization Process

H. Ikeda, Y. Nagatomi
Sanyo Special Steel Co., Ltd. (Japan)

17A-T9-28

Selection of New Lubricants and/or Machinability Enhancers for Optimized Performance of PM Stainless Steel

L. Chen¹, S. Li¹, A. Ahlin², P. K. Samal³, M. Persson^1
1Höganäs China Co. Ltd. (China), ²Höganäs AB (Sweden),
³North American Höganäs (USA)

17A-T9-29

Advanced Mechanical Properties of P/M 304L Stainless Steel Material

D. Cédat, I. Bobin, D. Bossu, D. Pierron, P. Ould
AREVA NP (France)

17B-S3-1 [KEYNOTE]

Spark Plasma Sintering of Nano-powders:
Characterization and Nanoscale Mechanical Performance

K. A. Khor
Nanyang Technological University (Singapore)

17B-S3-2

Microstructure and Mechanical Properties of ZrO2/ Ti Functionally Graded Materials Fabricated by Spark Plasma Sintering

H. Tsukamoto, Y. Komiya, H. Sato, Y. Watanabe
Nagoya Institute of Technology (Japan)

17B-S3-3

Effect of Cu Addition on Shape Memory Characteristics of Ti-Nb Based Alloy Fabricated by Pulse-Current Sintering

H. Kyogoku¹, D. Ohishi¹, A. Terayama^2
1Kinki University, ²Hiroshima Prefectural Technology Research Institute (Japan)

17B-S3-4

Microstructure and Mechanical Properties of Melt- Spun Aluminium Alloys Consolidated by Spark Plasma Sintering and Forging

Th. Schubert¹, B. Lorenz², J. Steger², Th. Weißgärber¹, R. Neugebauer², B. Kieback^1
1Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM, ²Fraunhofer Institute for Machine Tools and Forming Technology IWU (Germany)

17B-S3-5

Processing of Al/β-SiC Composites in Continuous Solid-Liquid Co-Existent State By SPS and their Thermal Conductivity

K. Mizuuchi¹, K. Inoue², Y. Agari¹, T. Nagaoka¹, M. Sugioka¹,
M. Tanaka¹, T. Takeuchi¹, J. Tani¹, M. Kawahara³, Y. Makino³, M. Ito^4
1Osaka Municipal Technical Research Institute (Japan), ²University of Washington (USA),
³Fuji Electronic Industrial Co., Ltd., ⁴Osaka University (Japan)

17B-S3-6

Thermal Properties of Diamond/Copper Composites Prepared by Spark Plasma Sintering and Hot Pressing

X. He, X. Shen, S. Ren, X. Qu
University of Science & Technology Beijing (China)

17B-S3-7

Microstructure Evolution of Ti-24Nb-4Zr-8Sn Biomedical Alloy Fabricated by Spark Plasma Sintering

Y. Zhang¹, Y. Gu¹, L. Luo², Y. Jiang¹, R. Zhou^1
1Kunming University of Science and Technology, ²First People's Hospital of Yunnan Province (China)

17B-S3-8

Magnetocaloric Effect in Bulk Nanocrystalline Gd Metals

H. Zeng¹, X. Wang¹, J. Zhang², C. Kuang¹, M. Yue^2
1Advance Technology & Materials Co., Ltd, ²Beijing
University of Technology (China)

17B-S3-9

Nanocrystalline Rare-earth Metals and Compounds Prepared by an In-situ Spark Plasma Sintering System

X. Song, Z. Zhang, D. Li, N. Lu, J. Zhang
Beijing University of Technology (China)

17B-S3-10 [KEYNOTE]

Electric Current Activated/Assisted Sintering Technology: Modeling and Development

Y. Sakka¹, S. Grasso^1,2, G. Maizza^3
1National Institute for Materials Science (NIMS) (Japan),
²Queen Mary, University of London (UK), ³Politecnico di Torino (Italy)

17B-S3-11

Fabrication of Si₃N₄/MAX Phase Composite Using Ultra High Pressure SPS

H. Hirano^1,2, Y. Sakka², T. Ishigaki^1
1Hosei University, ²National Institute for Materials Science (NIMS) (Japan)

17B-S3-12

Fabrication of Polycrystalline Ti₃AlC₂ Ceramics with Anisotropic Microstructure

Y. Mizuno^1,2, Y. Sakka^1,2
1University of Tsukuba, ²National Institute for Materials Science (NIMS) (Japan)

17B-S3-13

Full Consolidation of α-Si₃N₄ without Additives by High Pressure Spark Plasma Sintering

M. Mori¹, M. Ijiri¹, T. Kawaguchi¹, M. Ohyanagi¹, Z. A. Munir^2
1Ryukoku University (Japan), ²University of California, Davis (USA)

17B-S3-14

Texturization and Material Property of ZrB₂-based Ultra High Temperature Ceramics via Strong Magnetic Field Alignment

W.-W. Wu¹, Y. Sakka¹, T. Suzuki¹, G.-J. Zhang^2
1National Institute for Materials Science (NIMS) (Japan),
²Shanghai Institute of Ceramics (China)

17B-S3-15

Improvement of Mechanical Properties of Composite Material Using Bagasse Ash and Carbonized Bagasse

Y. Kanda, E. Nakamura, I. Fukumoto
University of the Ryukyus (Japan)

17B-S3-16

Spark Plasma Sintering of Transparent Lu-based Oxides

T. Goto, L. An, A. Ito
Tohoku University (Japan)

17B-S3-17

SPS-Synthesis of Transparent Aluminas and Microstructural Analysis

Y. Makino^1,2, M. Kawahara¹, M. Sakaguchi², Y. Kaiyama³, K. Akamatsu⁴, T. Yasuno^3
1Fuji Electric Industrial Co.Ltd., ²JTEKT Corporation, ³Iwaki Meisei University, ⁴Kaisai University (Japan)

17B-S3-18

Transparent Alumina Prepared by Two-step Sintering in Pulsed Electric Current Sintering

K. Q. Dang^1,2, M. Nanko^2
1Hanoi University of Science and Technology (Vietnam), ²Nagaoka University of Technology (Japan)

17B-S3-19

Two-Step Pulsed Electric Current Sintering of Alumina Ceramics

M. Nanko¹, K. Q. Dang^{1, 2}, S. Takei³, M. Kawahara^4
1Nagaoka University of Technology (Japan), ²Hanoi University of Science and Technology (Vietnam), ³Sinterland Inc., ⁴Fuji Electronic Industrial Co. Ltd. (Japan)

17B-S3-20

Consolidation of Stacking Disordered SiC by High Pressure SPS

M. Ohyanagi¹, T. Kawaguchi¹, D. Nakagawa¹, T. Tanaka¹, Z. A. Munir^2
1Ryukoku University (Japan), ²University of California, Davis (USA)

17B-S3-21

Effect of the Deoxidising Agents on Sinterability and Mechanical Properties of B₄C/Ti-6Al-4V

T. Takizawa, H. Kanazawa, H. Izui
Nihon University (Japan)

17C-S2-1 [KEYNOTE]

Metal Matrix Nanocomposites - Challenges and Opportunities

K. Xia¹, J.-F. Silvain^2
1University of Melbourne (Australia), ²CNRS, Universite de Bordeaux, ICMCB (France)

17C-S2-2

Complex Oxide Formation in Ni-base ODS alloys Synthesized by Reactive Ball Milling

Y. Liu, L. Zhang, M. Qin, X. He, X. Qu
University of Science and Technology Beijing (China)

17C-S2-3Cancelled

17C-S2-4

Characterization of γ' Precipitates in Co-base ODS Alloys

L. Zhang, X. Qu, X. He, M. Qin, Y. Liu
University of Science and Technology Beijing (China)

17C-S2-5

Fabrication of Nanoparticulate Reinforced Aluminum Matrix Composite

H. Kwon^1,2, H. Kurita¹, J. F. Silvain³, M. Leparoux², A. Kawasaki^4
1EMPA-Swiss Federal Laboratories for Materials Science and Technology (Switzerland), ²RIPS-Research Institute of Peace Studies (Korea), ³ICMCB-CNRC (France), ⁴Tohoku University (Japan)

17C-S2-6Cancelled

17C-S2-7

Mechanical Properties of Aluminum Strengthened with Nano-scale Ceramic Particles

A. Kazakewitsch, W. Riehemann
Techinical University of Clausthal (TU Clausthal) (Germany)

17C-S2-8Cancelled

17C-S2-9Cancelled

17C-S2-10 [KEYNOTE]

Nanotube and Graphene Nanoplatelet Reinforced Metal and Ceramic Composites

D. Lahiri, A. Agarwal
Florida International University (USA)

17C-S2-11Cancelled

17C-S2-12

Carbon Nanotubes Reinforced Titanium Powder Composite Materials

K. Kondoh¹, T. Threrujirapapong¹, S. Li¹, B. Sun¹, J. Umeda¹, B. Fugetsu^2
1Osaka University, ² Hokkaido University (Japan)

17C-S2-13

Poreless Nanostructured Assemblies of Carbon Nanotube and Alumina Ceramic: Realization and Characterizations

M. Estili¹, A. Kawasaki², Y. Sakka^1
1National Institute for Materials Science (NIMS), ²Tohoku University (Japan)

17C-S2-14

Fabrication and Properties of Nano Carbon Material-Alumina Composite

M. Omori, G. Yamamoto, K. Shirasu, T. Hashida
Tohoku University (Japan)

17C-S2-15

Graphene/Metal Oxide Composite

Y. Fan, A. Kawasaki
Tohoku University (Japan)

17C-S2-16

Microstructural Characterization of Cold Sprayed Cu/CNT Nanocomposite Coating

K. Takagi¹, S. Cho², D. Seo², K. Ogawa², A. Kawasaki^2
1National Institute of Advanced Industrial Science and Technology (AIST), ²Tohoku University (Japan)

17C-S2-17

Relationship between Interphase Chemistry and Mechanical Properties at the Scale of Micron in Cu–Cr/CF Composite

N. Chandra², J. M. Heintz¹, J. Douin³, A. Veillere¹, J. F. Silvain^1
1CNRS, Universite de Bordeaux, ICMCB (France), ²University of Nebraska-Lincoln (USA),
³Centre d’Elaboration de Mate´riaux et d’Etudes Structurales (France)

17C-S2-18

Evaluation of Interfacial Thermal Resistance in Multiwalled Carbon Nanotube/Copper Matrix Composite

S. Cho, K. Kikuchi, A. Kawasaki
Tohoku University (Japan)

17C-S2-19

Role of Copper-Carbon Nanofibers Interfaces on Thermal Conductivity of Cu/CNF Composite

A. Veillere¹, C. Vincent¹, J.M. Heintz¹, N. Chandra², J.F. Silvain^1
1CNRS, Universite de Bordeaux, ICMCB (France), ²University of Nebraska-Lincoln (USA)

17D-T3-20

Flash Reactive Sintering of Intermetallics from Mechanically Activated Powder Mixture

F. Naimi, S. Le Gallet, F. Bernard
Université de Bourgogne (France)

17D-T3-21

Improving the Properties of Un-Alloyed Iron PM Parts by a Gas Alloying Process without Rapid Cooling

N. Gopinath¹, V. Raghunathan¹, S. Sriram^2
1Fluidtherm Technology, ²Sundram Fasteners Ltd. (India)

17D-T3-22Cancelled

17D-T3-23

The Effect of Gas Flow Pattern on the Sintering of a 2xxx Series Aluminium Alloy

X. N. Yuan, M. Qian, S. M. Aminossadati, G. B. Schaffer
The University of Queensland (Australia)

17D-T3-24Cancelled

17D-T3-25

Microwave Sintering of Titanium and Titanium Alloys

S.D. Luo, Y.F. Yang, G.B. Schaffer, M. Qian
The University of Queensland (Australia)

17D-T3-26

Heating Behaviors of Compacted Metallic Powders in Magnetic Field of 2.45 GHz Single-Mode Microwave

M. Taguchi, K. Okamoto
Hitachi, Ltd. (Japan)

17D-T3-27Cancelled

17D-T13-1

Mechanical Properties and Workability of 100-200 nmgrained WC-Co Hardmetals

M. Kawakami, M. Ota, J. Obara, K. Kitamura, O. Terada, K. Hayashi
Fuji Die. Co., Ltd (Japan)

17D-T13-2

Comparison of Ultrafine and Near Nano WC for Hardmetals for Cutting Applications

B. Caspers¹, T. Säuberlich¹, M. Zumdick¹, E. Metzger²,
¹H.C. Starck GmbH (Germany) ²WMC Sinterstar AG (Switzerland)

17D-T13-3

Rapid Synthesis of Ultrafine WC-Co Cemented Carbides

X. Song, H. Wang, C. Wei, Y. Gao, X. Liu, J. Fu, Y. Wang
Beijing University of Technology (China)

17D-T13-4

Microstructure and Properties of Fine Grained WC-Co Cemented Carbide with the Addition of (Ti,X)(C,N) Solid Solution Powder

M. Takada¹, Y. Mori¹, Y. Kawagishi¹, T. Matsuda², H. Matsubara^2
1Nippon Tokushu Goukin Co., Ltd., ²Japan Fine Ceramics Center(Japan)

17D-T13-5

Grain-growth Inhibition in Binderless Cemented Carbide by the Addition of (Ti,X)(C,N) Solid Solution Powder

K. Fujimoto¹, K. Furukawa¹, S. Ueno¹, K. Nakahara¹, T. Matsuda², H, Matsubara^2
1Nippon Tungsten Co. Ltd., ²Japan Fine Ceramics Center (Japan)

17D-T13-6

Functionally Gradient WC-Co Composites with ∪-Shape and ∩-Shape Co Profiles

T. K. Sung, K. H. Cho
TaeguTec (Korea)

17D-T13-7

A New Method for Manufacturing Functionally Graded Cemented Tungsten Carbide

Z. Fang, P. Fan, J. Guo, X. Wang, K. Hwang
The University of Utah (USA)

17D-T13-8

The Duplex Structured-Cemented Carbide Prepared by Sintering the Tungsten Carbide Involving the Nano Metal Cobalt Domains with Cobalt Binder Phase

M. Morishita¹, H. Yamamoto¹, T. Okahira¹, M. Yoshioka¹, M. Ikebe², M. Iwasaki², H.Yanagida²,
H. Nishimaki^2
1University of Hyogo, ²SANALLOY INDUSTRY Co., Ltd. (Japan)

17D-T13-9

Densification, Microstructure and Wear Properties of WC-Ni-Co-Cr Alloys Used in Hot Rolling Applications

M. Aristizabal, I. Iturriza, J.M. Sánchez
CEIT and TECNUN (University of Navarra) (Spain)

17D-T13-10

Reactive Imbibition of WC-Co Substrate for PDC Cutters Used in Oil and Gas and Mining Drilling

O. Ther¹, C. Colin¹, L. Gerbaud¹, A. Dourfaye^2
1Mines ParisTech, ²Varel Europe (France)

17D-T13-11

Cutting Performance of Composite Structured W Reduction Tool

T. Ishida, H. Moriguchi, A. Ikegaya
Sumitomo Electric Industries, Ltd. (Japan)

17E-T15-1

Ni₅₄Fe₁₉Ga₂₇ Shape Memory Alloy Produced by Powder Metallurgy Routes

F. Alvarado¹, L. Olmos², J. Lemus², M. Albiter³, R. Ochoa^4
1Unidad Académica de Ingeniería, UAZ, ²Instituto de Investigaciones Metalúrgicas, UMSNH,
³Facultad de Ingeniería Química, UMSNH,
⁴Centro de Investigación en Materiales Avanzados, CIMAV (México)

17E-T15-2

Powder Metallurgy of NiTi Shape Memory Alloys:
Production, Characterization and Properties

M. Bram, M. Bitzer, H. P. Buchkremer, D. Stöver
Forschungszentrum Jülich GmbH (Germany)

17E-T15-3

Fabrication by Tape Casting and Hot Pressing of Copper/ Diamond Composite Films for Electronic Packaging Applications

T. Guillemet^1,2, J.-M. Heintz¹, N. Chandra², Y. Lu², J.-F. Silvain^1
1CNRS, Universite de Bordeaux, ICMCB (France), ²University of Nebraska-Lincoln (USA)

17E-T15-4

Effect of Ti Coating on Thermal Conductivity of Diamond/Al Composites by Powder Metallurgy

S. Ren, C. Guo, H. Xu, X. He, X. Qu
University of Science and Technology Beijing (China)

17E-T15-5Cancelled

17E-T15-6Cancelled

17E-T15-7

Magnesium Carbon Composites for Hydrogen Storage and Production

T. Tayeh^1,2, M. Nakhl², M. Zakhour², J.-F. Silvain¹, J.-L. Bobet^1
1CNRS, Universite de Bordeaux, ICMCB (France), ²Université Libanaise (Liban)

17E-T7-1

Material Overlaps of Rolled PM Gears

F. Klocke, M. Brumm, E. Gräser
RWTH Aachen University (Germany)

17E-T7-2

Improvement of Contact Fatigue Strength by Rolling of Sintered Compacts made of Mo Hybrid Alloyed Steel Powder

S. Unami¹, H. Miura^2
1JFE Steel Corporation, ²Kyushu University (Japan)

17E-T7-3

Effect of Machining Enhancer Related with Machining Speed at Sintered Steel

N. Akagi, H. Tanaka, S. Furuta
Kobe Steel, Ltd (Japan)

17E-T7-4

Development and Practical Use of Green Machining

I. Sato
Fine Sinter Co.,Ltd (Japan)

17E-T7-5

MQL Machining of Sintered Steel with Different Tools

T. Maetani¹, S. Unami¹, Y. Ozaki¹, T. Ohno², M. Yamaguchi², T. Obikawa^2
1JFE Steel Corporation, ²The University of Tokyo (Japan)

17E-T7-6

Machinability of Malleable Iron Powder Materials vs Ductile Iron and Powder Forged FC-0205 Materials

M. Moravej, J. Campbell-Tremblay, C. Labrecque
Rio Tinto Metal Powders (Canada)

17E-T7-7

The Grain Size Effeciency on Surface Roughness in Rough Machining the Hardened C45 Steel Using Brown Al₂O₃ Grinding Wheels

N. T. Dong, N. T. P. Giang
Hanoi University of Science and Technology (Vietnam)

17E-T7-8Cancelled

17E-T7-9

Heat Treatment of Distaloy AQ – Processing Aspects and Properties Achievable

R. Frykholm, O. Litström
Höganäs AB (Sweden)

17E-T7-10

Development of Induction Hardening for Narrow Groove of Rotor VVT

M. Sato, Y. Adachi
Sumitomo Electric Sintered Alloy, Ltd. (Japan)

17F-T8-1

Elastic-Plastic Powder Compaction Simulations

E. Olsson, P.-L. Larsson
Royal institute of Technology (Sweden)

17F-T8-2

Numerical Simulation of the Near-Netshape Manufacturing of Large Refractory Metal Crucibles and Tubes

A. Plankensteiner, C. Grohs, L. S. Sigl, H. Kestler
Plansee SE (Austria)

17F-T8-3Cancelled

17F-T8-4

Sintering of Ni-Based Eletrodes in MLCC:Numerical Simulation and Experiment

Z. Yan^1,2, O. Guillon³, C. L. Martin¹, S. Wang⁴, C.-S. Lee⁵, D. Bouvard^1
1Grenoble INP (France), ²Technische Universität Darmstadt, ³University of Jena (Germany),
⁴Advanced Photon Source, Argonne National Laboratory (USA), ⁵Samsung Electro-Mechanics (Korea)

17F-T8-5

Modelling and Simulation of High Velocity Loaded Iron Powder

G. Gustafsson¹, P. Jonsén¹, H.-Å. Häggblad¹, H. Kato², M. Nishida², M. Oldenburg^1
1Luleå University of Technology (Sweden), ²Nagoya Institute of Technology (Japan)

17F-T12-1

Effect of Alumina on Antiviral Activities of Calcium Oxide

Z.-C. Chen, Y. Miyauchi, K. Motoike, T. Onda, T. Akao, M. Nagashima
Tottori University (Japan)

17F-T12-2Cancelled

17F-T12-3

Mechanical Properties of Porous Ti Alloy Products Fabricated by Electron Beam Melting Method

N. Ikeo, T. Matsumi, T. Nakano
Osaka University (Japan)

17F-T12-4

A New Bioactive Porous Titanium Device for Lumber Interbody Fusion

K. Hanami¹, H. Kitagaki¹, T. Teraoka¹, K. Doi¹, S. Terauchi¹,
T. Matsushita², T. Kokubo², S. Fujibayashi³, M. Takemoto³, T. Nakamura^3
1Osaka Yakin Kogyo Co., Ltd., ²Chubu University, ³Kyoto University (Japan)

17F-T12-5

Microstructure and Mechanical Properties of Spark Plasma Sintered Ti-Mo Alloys for Dental Applications

X. Lu, T. Zhao, C. Liu, X.-H. Qu
University of Science and Technology Beijing (China)

17F-T11-1

Powder Metallurgy Titanium Materials by Hydrogen Sintering

Z. Z. Fang, P. Sun, H. Wang
The University of Utah (USA)

17F-T11-2Cancelled

17F-T11-3

Development of PM Process for Ti Alloy Components Based on TiH₂

J. S. Han¹, C. Y. Kim¹, D. Y. Park¹, C. G. Lee², S. J. Park^1
1Pohang University of Science and Technology (POSTECH), ²RIST (Korea)

17F-T11-4Cancelled

17F-T11-5Cancelled

17F-T11-6

Sintering and Age-Hardening of a Hypereutectic Aluminium-Silicon P/M Alloy

Th. Schubert¹, S. Müller², Th. Weißgärber¹, B. Kieback^1
1Fraunhofer IFAM, ²Schunk Sintermetalltechnik GmbH (Germany)

17F-T11-7

Acrawax C Removal from Aluminium-Based Compacts

T. Pieczonka¹, K.J. Kurzydłowski², J. Mizera², J. Kazior^1
1Cracow University of Technology, ²Warsaw University of Technology (Poland)

17F-T11-8

Alloy Metal Foam Process and Applications for Filtration and Catalyst Supports

G. Walther¹, B. Klöden¹, T. Büttner¹, B. Kieback¹, R. Poss², J.S. Bae³, M.J. Jang³, M.H. Park^3
1Fraunhofer IFAM Dresden, ²Alantum Europe GmbH (Germany), ³Alantum Corp. (Korea)

17F-T11-9Cancelled

17F-T11-10

Finite Element Simulation of Designing Gears of Porous Metals

Y. Shin¹, J. Gu¹, S. Hwang¹, J. H. Baek², J. H. Kim², S. T. Chung³, S. H. Chung⁴, S. J. Park^1
1Pohang University of Science and Technology (POSTECH), ²Korea Sintered Metal Co., Ltd.,
³CetaTech Inc., ⁴Hyundai- Steel Co, Ltd. (Korea)

17F-T11-11

Development of Corrosion-Resistant Bearing Material for Fuel Pumps

S. Takezoe¹, Y. Tamura¹, Y. Ishii¹, T. Maruyama¹, T. Nozu²,
Y. Murakami², N. Inayoshi², K. Ooi², H. Narisako^2
1Diamet Corporation, ²DENSO Corporation (Japan)

17F-T11-12

Helical Grooves Bearing with Long Life for Fan Motors

H. Tokushima
Hitachi Powdered Metals, Co., Ltd. (Japan)

P-T3-25Cancelled

P-T3-26Cancelled

P-T3-27

Evolution of Physical and Mechanical Properties and Gravitational Effect During Liquid Phase Sintering of Cu- 10Sn-10Pb Prealloyed Powder

M. Azadbeh, A. Mohammadzadeh, S. Shadpour
Sahand University of Technology (Iran)

P-T3-28

Evolution of Properties and Gravitational Effect During Supersolidus Liquid Phase Sintering of Cu-20Zn Alloyed Powder

M. Azadbeh, A. Mohammadzadeh, A. Sabahi
Sahand University of Technology (Iran)

P-T3-29

The Electrical Resistance Sintering Process: Modelling and Experimental Results

J.M. Montes¹, F.G. Cuevas², P. Urban¹, J. Cintas^1
1University of Seville, ²University of Huelva (Spain)

P-T3-30

Mechanical Properties and Microstructure of Reactive Sintered WC-TiC-Co Cemented Carbides

M. Tarraste, K. Juhani, J. Pirso, M. Viljus, S. Letunovitš
Tallinn University of Technology (Estonia)

P-T3-31

Analysis of Reaction Mechanisms of M-Al (M= Co, Fe) Intermetallic Compounds by Dipping Experiment of Metal Wire into Molten Al

A. Hibino
Toyama Prefectural University (Japan)

P-T3-32

Effect of TZP Addition on Microstructure and Mechanical Properties of Alumina-Matrix Composites

K. Maeda, M. Ezumi, T. Yamashita, T. Akao, T. Onda, Z.-C. Chen
Tottori University (Japan)

P-T3-33

A Research on WC-8Co Preparation by Microwave Sintering:
Processing, Microstructure and Mechanical Properties

R. Bao
Central South University (China)

P-T3-35Cancelled

P-T3-36

Microstructure of Microwave-Sintered WC-Co Cemented Carbide

K. Nakamura¹, M. Taguchi¹, K. Okamoto¹, H. Tamura², Y. Kubo^2
1Hitachi, Ltd., ²Hitachi Tool Engineering, Ltd. (Japan)

P-T3-37

Consolidation of Binderless Cemented Carbide by High Frequency Induction Heated Pressing

X. Q. Liu^1,2, L. M. Wang^1,2, Z. M. Guo³, T. Lin³, L. Wang^1,2, L. G. Wang^1,2
1General Research Institute of Nonferrous Metals, ²GRIPM Advanced Material Co.,
Ltd., ³University of Science & Technology Beijing (China)

P-T3-38

Relationship between Annealing and Mechanical Properties of Porous Titanium Produced by Spark Plasma Sintering

Y. Sakamoto¹, Y. Kawakami^2
1Oita National Collage of Technology, ²Industrial Technology Center of Saga (Japan)

P-T3-39

Deformation Behavior of Fine-grained Silicon Nitride Fabricated by Spark Plasma Sintering

R. Wananuruksawong, Y. Shinoda, T. Akatsu, F. Wakai
Tokyo Institute of Technology (Japan)

P-T3-40

Basic Study of Magnesium Powder Metallurgy Technique for Easy Handling

T. Iwaoka¹, M. Nakamura^2
1Tokyo Metropolitan Industrial Technology Research Institute, ²Iwate University (Japan)

P-T3-41

Fabrication and Characterization of High-Density MoO₃ Pellets

K. Nishikata¹, A. Kimura¹, K. Tsuchiya¹, T. Shiina², A. Ota², M. Tanase^2
1Japan Atomic Energy Agency, ²Chiyoda Technol Corporation (Japan)

P-T3-42

Crystallization Kinetic and Consolidation of Mechanical Alloyed Fe79Ti16P5 Amorphous Powders

C. Y. Tang, Z. Y. Xiao, X. F. Li, L. Hu, Y. Y. Li, F. Luo
South China University of Technology (China)

P-T3-43

Development of Spark Plasma Sintering Device Using Induction Heating Process

H. Kodera¹, T. Misawa¹, T. Enjoji², T. Hirai², Y. Kawakami², M. Kawahara³, N. Shikatani⁴, Y. Ohtsu^1
1Saga University, ²Industrial Technology Center of Saga, ³Fuji Electronic Industrial Co., Ltd,
⁴Fukuoka Institute of Technology (Japan)

P-T3-44

Microstructure and Wear Behavior of Sinter Hardened Astaloy CrA PM Steel

K. Sheikhi Moghaddam¹, N. Solimanjad^2
1University of Tehran (Iran), ²Höganäs AB (Sweden)

P-T3-45

Study on Friction and Wear Performance of Sintering Steel Infiltrated with Copper

X. Xiong, J. Sun, R. Liu, S. Peng
Central South University (China)

P-T3-46

Compact-Atmosphere Interactions at Sintering of Chromium Containing Steels. A Thermodynamic Approach

M. Orban, R. L. Orban
Technical University of Cluj-Napoca (Romania)

P-T3-47Cancelled

P-T4-48

Historical Review of FEM Simulation in the PM-HIP Technology and FEM Application to the Understanding of the Influence of P-T Operation Procedure

Y. Nagamachi, T. Teraoku, T. Fujikawa
Metal Technology Co. Ltd. (Japan)

P-T4-49

Effect of Manufacturing Conditions on the Utilitarian Properties of AlCuMgMn (ZrSc) Alloy Consolidated from Powder

B. Płonka, S. Boczkal, M. Rajda
Institute of Non Ferrous Metals (Poland)

P-T4-50

Mechanical and Electrical Properties of Titanium Carbide Reinforced Copper Composite

H. L. Vu^1,2, L. Q. Tran², B. N. Duong², K. Q. Dang², T. H. Le^2
1Thai Nguyen University of Technology, ²Hanoi University of Science and Technology (Vietnam)

P-T4-51

Consolidation of Recycled TiH₂ Powders Using Extrusion Process

J. M. Jang¹, B. Cha², W. Lee¹, S.-H. Ko¹, S. H. Son^1
1Korea Institute of Industrial Technology, ²Samsung Electro- Mechanics Co., Ltd (Korea)

P-T4-52Cancelled

P-T4-53

Selective Laser Melting of Titanium Alloy Parts and Forming Atmosphere Effect for the Products

T. Shimizu¹, S. Nakano¹, Y. Horiba², M. Sassa², M. Hagiwara², K. Matsuzaki^1
1AIST., ²ASPECT Inc. (Japan)

P-T4-54

Porosity Measurements in Laser Sintered Powder Parts

E.M. Perez-Soriano¹, F. Lasagni², J.M. Gallardo¹, J. Cintas^1
1University of Seville, ²Center for Advanced Aerospace Technologies (FADA-CATEC) (Spain)

P-T5-62

High Strength and Wear-resisting Materials for Metal　Injection Moulding

G. Xiong, B. Li
YUELONG Superfine Metal Co.,Ltd (China)

P-T6-65

The Increase in Mechanical Properties of Powder Materials　and Pseudoalloys on the Base of Iron with Nanostructured　Additives

A.Ph. Ilyushchenko, L.N. Dyachkova, P.A. Kireev, V.V. Savich
Powder Metallurgy Institute (Belarus)

P-T6-67

Synthesis and Distribution of Nano Cobalt Particles by Polyol Process

J. H. Lee¹, T. H. Lee¹, H. S. Hong², Y. D. Kim^1
1Hanyang University, ²Institute for Advanced Engineering (Korea)

P-T7-74

Effect of a Newly Developed Machinability Aid on Machinability of Sintered Steels

T. Maetani, S. Unami, Y. Ozaki
JFE Steel Corporation (Japan)

P-T7-75

Effect of Drill Point Angle on Green Machinability of High-Strength Steel Powder Compact

Y. Tanaka¹, S. Tsurimoto², K. Okimoto^2
1PRIMIX Corporation, ²Setsunan University (Japan)

P-T7-77

Study on the Mechanical Properties of Surface Dense Sinter Steel by Cold Rolling

C.-H. Cheng, B.-F. Cheng
Chung Chou University of Science and Technology (Taiwan)

P-T7-78

Joining and Welding of Ferrous P/M Parts

B. Chongxi, M. Zengguang, C. Yang
NBTM New Materials Group Co., Ltd.(NBTM) (China)

P-T8-79

Complex Shape High Nitrogen Steels Parts Fabricated by Hot Isostatic Pressing

X. Wang, C. Kuang, G. Huo, H. Zhong
Advance Technology & Materials Co., Ltd (China)

P-T8-80Cancelled

P-T8-81

Particle Packing Simulation Using Vibration Method

F. Tsumori, H. Kang, T. Osada, H. Miura
Kyushu University (Japan)

P-T11-97

Novel Dispersion Strength Aluminium Materials

T. Hutsch¹, J. Gradl², T. Schubert¹, T. Weißgärber¹, B. Kieback^1,3
1Fraunhofer-Institute for Manufacturing Technology and Advanced Materials, ²ECKA Granules Germany GmbH,
³Technical University Dresden (Germany)

P-T11-98

Microstructure, Fracture and Mechanical Properties of ECAPed Aluminium Alloy

R. Bidulsky¹, J. Bidulská², M. A. Grande¹, L. Lityńska-Dobrzyńska^3
1Politecnico di Torino (Italy), ²Technical University of Košice (Slovakia), ³Polish Academy of Sciences (Poland)

P-T11-99Cancelled

P-T11-100Cancelled

P-T11-101

Fabrication of Ti Foams by Solid State Replication

Y. Orlova¹, K. Maekawa², D. Orlov^3
1Kyoto University, ²Ibaraki University (Japan), ³Monash University (Australia)

P-T12-102

Processing, Characterisation and Mechanical Properties of Novel Biocompatible Ti-Zr-Ta Alloys

A. Biesiekierksi¹, J. Wang¹, C. Wen¹, D. Ping^2
1Swinburne University of Technology (Australia), ²National Institute for Materials Science (Japan)

P-T13-111

Facile Processing Method of Nano Crystalline Tungsten Carbide

T. Onoki
Osaka Prefecture University (Japan)

P-T14-119

Single-Crystal Fe Nanoparticles with a High Saturation Magnetization Synthesized by a Chemical Route Using Trioctylamine-Tribenzylamine Mixed Surfactant

M. Kamata¹, H. Kura², M. Takahashi^2,3, T. Ogawa², T. Tanaka^1
1Ehime University, ²Tohoku University (Japan), ³Chungnane National University (Korea)

P-T14-120

Synthesis and Magnetic Properties of Y-Type Ferrites Substituted with Li

S. Koyama¹, M. Nakanishi¹, T. Fujii¹, J. Takada¹, A. Hida², H. Yasui
¹Okayama University, ²Mate Co., Ltd (Japan)

P-T14-121

Physical Properties of Itinerant Magnetic Compounds BaCo²P²

M. Imai¹, H. Ohta², C. Michioka¹, H. Ueda¹, K. Yoshimura^1
1Kyoto University, ²Tokyo University of Agriculture and Technology (Japan)

P-T14-122

Synthesis of CrSe² with a Deintercalation Method from K^xCrSe²

S. Kobayashi, C. Michioka, H. Ueda, K. Yoshimura
Kyoto University (Japan)

P-T14-123

Doping Dependence of Magnetic Properties in FeGa^3-yGe^y

Y. Zhang¹, M. Imai¹, C. Michioka¹, K. Yoshimura¹, Y. Hadano², T. Takabatake^2
1Kyoto University, ²Hiroshima University (Japan)

P-T14-124

Magnetic Properties of Sr₃Co_2-xZn_xFe₂₄O₄₁ Z-type Ferrite Synthesized by Polymerizable Complex Method

T. Tainaka¹, T. Kikuchi¹, T. Nakamura¹, T. Yamasaki¹, M. Nakanishi², T. Fujii², J. Takada², Y. Ikeda^3
1University of Hyogo, ²Okayama University, ³Research Institute for Production Development (Japan)

P-T14-125

Relationship between Coercive Force and Residual Stress in Mechanically Alloyed Nanocrystalline Al-Fe Powder

K. Kodama, A. Yoshoda, Y. Taniguchi
Nara national college of technology (Japan)

P-T14-126

Composite Materials for High-Current-Density Thermionic Cathodes Based on Ba_xSr_1-xHfO₃-W

A. Taran¹, O. Kyslytsyn¹, S. Ordanjan², P. Komozinskij^1
1National Aerospace University “Kharkiv Aviation Institute” (Ukraine),
²S.-Petersburg Government Technology Institute (Russia)

P-T14-127

Study on the Soft Magnetic Property of Fe/FeCuNbSiB Megnetic Core

X. Zheng^1,2, B. Yan^1,2
1Shanghai Key Lab of Metal-Functional Materials, ²Tongji University (China)

P-T14-128

Effect of Powder Characteristics on Core Loss and DC Bias of MPP Magnetic Powder Cores

T. Zhao, H. Ma, J. Zhang
Advanced Technology & Materials Co., Ltd. (China)

P-T14-129

Soft Magnetic Properties of Fe-Si Alloy Powders in High Frequency Range

M. Fukuda, K. Kume, T. Yamada, Y. Shimizu, F. Kino
Mitsubishi Steel Mfg. Co., Ltd. (Japan)

P-T14-130

High Frequency Soft Magnetic Properties of Fe-Al Alloy Powders

M. Fukuda, K. Kume, T. Yamada, Y. Shimizu, F. Kino
Mitsubishi Steel Mfg. Co., Ltd. (Japan)

P-T14-131

Magnetic Properties of NdFeB Magnets by Microstructure Change

J. W. Kim, S. Y. Song, Y. D. Kim
Hanyang University (Korea)

P-T14-132

Microstructure of Sintered Nd₂Fe₁₄B Magnets after Compression by Shock Wave

Y. F. Li¹, M. G. Zhu¹, D. Zhou¹, W. Li¹, F. Lu², L. Chen², J. Y. Wu², Y. Qi³, A. Du^3
1Central Iron and Steel Research Institute, ²Beijing Institute of Technology,
³Northeastern University (China)

P-T14-133

Effects of Sintering Temperature on Microstructures and Magnetic Properties of Ce(Co_0.72Cu_0.14Fe_0.14)₅ Magnets

W. Sun, M. Zhu,Y. Fang, W. Pan, J. Li, Y. Li, J. Wang, W. Li
Central iron and steel research institute (China)

P-T14-134

Microstructures and Magnetic Properties of SmCo-based Permanent Magnets

Y. Fang, Z. Guo, W. Pan, M. Zhu, M. Xia, W. Sun, J. Cui, H. Feng, W. Li
Central iron and steel research institute (China)

P-T16-141

Dependence of Magnetic Characteristics of Form Rolling Sintered Steel on Residual Stress

T. Mizuno¹, Y. Asato¹, Y. Kitamura¹, S. Goto¹, T. Watanabe¹,
T. Takemasu², T. Shinbutsu³, S. Amano³, H. Yoshikawa³, A. Suda^3
1Shinshu University, ²Tokyo University of Science, ³Nissei Co., Ltd.(Japan)

P-T16-142

A Novel Manufacturing Route for Metal Supported Thin- Film Solid Oxide Fuel Cells

M. Haydn¹, Th. Franco¹, R. Mücke², M. Rüttinger¹, N.H. Menzler², A. Venskutonis¹, L. S. Sigl¹, A. Weber^3
1Plansee SE (Austria), ²Forschungszentrum Jülich GmbH, ³Institut für Werkstoffe der Elektrotechnik (IWE), Karlsruher Institut für Technologie (KIT) (Germany)

P-T16-143

Microstructure and Formation Conditions of Brownish Color Pattern on Traditional Japanese Stoneware

Y. Oomori¹, Y. Kusano², M. Nakanishi¹, T. Fujii¹, M. Fukuhara³, J. Takada^1
1Okayama University, ²Kurashiki University of Science and the Arts,
³Okayama University of Science (Japan)

P-T16-144

Characterization of Ancient Iron Oxide Pigment, Bengala, Excavated from Japanese Archaeological Site

H. Tsuji¹, R. Murakami², T. Miyazaki³, H. Hashimoto¹, T. Danno¹, T. Kikuchi⁴, Y. Kusano⁵, T. Fujii¹,
J. Takada^1
1Okayama University, ²Kyoto National Museum, ³Bord of Education, Kumamoto Pref,
⁴JFE Mag-Powder Corporation, ⁵Kurashiki University of Science and the Arts (Japan)

18A-SIS1-1 [SPECIAL INVITED]

Development and Trends in North American PIM

A. Bose¹, R. M. German^2
1Materials Processing, Inc., ²San Diego State University (USA)

18A-SIS1-2 [SPECIAL INVITED]

Current Status and Future Perspectives of MIM Technology

F. Petzoldt
Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM (Germany)

18A-SIS1-3 [SPECIAL INVITED]

Development and Trends of MIM in Taiwan

K.-S. Hwang
National Taiwan University (Taiwan)

18A-SIS1-4 [SPECIAL INVITED]

New Development and Trend in Korean Powder Injection Molding

S. J. Park¹, S. W. Lee², Y.-S. Kwon^3
1Pohang University of Science and Technology (POSTECH),
²Pusan National University, ³CetaTech, Inc. (Korea)

18A-SIS1-5 [SPECIAL INVITED]

A Review of the MIM Industry in China

Y. Li, H. He
Central South University (China)

18A-SIS1-6 [SPECIAL INVITED]

Recent MIM Activity & Standardization in Japan

Y. Kato
Kato Professional Engineering Office (Japan)

18A-T16-1

The Change of Variable Valve Timing Unit and the Proper Example of Sintered Parts

S. Komasaki, T. Nishita
Diamet Corporation (JAPAN)

18A-T16-2

Development of a Valve Seat by Rare Earth Addition

M. Sugimoto, Y. Ueda, H. Sato
FINE SINTER Co., Ltd. (Japan)

18A-T16-3

Overview of Properties of the Materials Used to Manufacture Connecting Rods

E. Ilia, K. Tutton, G. Lanni
Metaldyne LLC (USA)

18A-T16-4

Tooth Root Optimization Of Powder Metal Gears – Reducing Stress From Bending and Transient Loads

A. Flodin, M. Andersson
Höganäs AB (Sweden)

18A-T16-5

Automotive Transmission Design Using Full Potential of Powder Metal

A. Flodin¹, P. Karlsson^2
1Höganäs AB, ²Vicura AB (Sweden)

18A-T16-6

DensiForm^®Helical Gears for Automotive Transmissions

S. Nigarura¹, M. Scott¹, R. Parameswaran¹, G. Rau^2
1PMG Indiana (USA), ²PMG Füssen (Germany)

18A-T16-7

Development of P/M Part for Chain Type Longitudinal CVT

Y. Akiyama, Y. Tsuchiya, K. Inoue
Sumitomo Electric Sintered Alloy, Ltd. (Japan)

18A-T16-8

Development of High Efficiency Internal Gear Pump Rotor (Geocloid Rotor)

K. Yoshida, M. Uozumi, Y. Shimada, T. Kosuge
Sumitomo Electric Sintered Alloy, Ltd. (Japan)

18A-T16-9

Armor Elements Made by Powder Metallurgy Routes

M. A. Grande, R. Bidulsky, M. Maccarini
Politecnico di Torino (Italy)

18A-T16-10

Research on the PM Process of High Cu Content Steel Alloy Powder as the Basic Study for Wasted Automotive Materials Recycle System

T. Iwaoka¹, A. Fujiki², J. Asami^3
1Tokyo Metropolitan Industrial Technology Research Institute, ²Shibaura Institute of Technology,
³Organization for Small & Medium Enterprises and Regional Innovation (Japan)

18B-S3-22 [INVITED]

Property- and Shape-Control for Titanium Compacts in Spark Sintering Process

K. Matsugi¹, Y.B. Choi¹, G. Sasaki¹, A. Hiraiwa¹, O. Yanagisawa¹, H. Kuramoto², T. Oki^2
1Hiroshima University, ²Hiroshima City Industrial Promotion Center (Japan)

18B-S3-23 [INVITED]

Low-temperature Sintering of Non-equilibrium Powders by Pulsed Current Sintering Method

K. Ozaki, K. Takagi, H. Nakayama
National Institute of Advanced Industrial Science and Technology (AIST) (Japan)

18B-S3-24

Effects of Directly Applied Current Heating on Densification Behavior of Electrical Conductive Powder

M. Ito, K. Araki
Osaka University (Japan)

18B-S3-25

Integrated Electro-Thermo-Mechanical Analysis of Spark Plasma Sintering

E. A. Olevsky¹, E. G. Grigoryev^2
1Moscow Engineering Physics Institute (Russia), ²San Diego State University (USA)

18B-S3-26

Densification Behavior of Thermoelectric Strontium Titanate during Spark Plasma Sintering

A. Kikuchi, N. Okinaka, T. Akiyama
Hokkaido University (Japan)

18B-S3-27

Spark Plasma Sintering Mechanism of Nanostructured Copper Powder

A. Molinari, S. Djouf
University of Trento (Italy)

18B-S3-28

Influence of Pulsed Current Frequency on Sintering Behavior of SPS Process

T. Misawa¹, H. Kodera¹, T. Enjoji², T. Hirai², Y. Kawakami², M. Kawahara³, N. Shikatani⁴, Y. Ohtsu^1
1Saga University, ²Industrial Technology Center of Saga, ³Fuji Electronic Industrial Co., Ltd,
⁴Fukuoka Institute of Technology (Japan)

18B-S3-29

Rapid Densification during High-voltage Electric Pulse Sintering

E. G. Grigoryev¹, E. A. Olevsky^1,2
1Moscow Engineering Physics Institute (Russia), ²San Diego State University (USA)

18B-S3-30

Development of Large Sized Three Dimensional Ti- 6Al-4V Alloy for Industrial Application by Sark Plasma Sintering (SPS) Method

M. Tokita¹, T. Hikono¹, H. Morita¹, S. Takei², T. Sato^2
1NJS Co., Ltd., ²Sinter Land Inc. (Japan)

18B-S3-31 [INVITED]

Chemistry of Spark Plasma Sintering

Y. Grin
Max-Planck-Institut für Chemische Physik fester Stoffe (Germany)

18B-S3-32

Creation of Harmonic Structured Composite Materials with Titanium and Ti-48at%Al Alloy by MM / SPS Process

T. Kawabata¹, H. Fujiwara¹, H. Miyamoto¹, K. Ameyama^2
1Doshisha University, ²Ritsumeikan University (Japan)

18B-S3-33

Creation of Harmonic Structured Composite Materials with Tool Steel and Carbon Steel by MM / SPS Process

Y. Yamada¹,H. Fujiwara¹, H. Miyamoto¹, K. Ameyama^2
1Doshisha University, ²Ritsumeikan University (Japan)

18B-S3-34

Strengthening of the Harmonic SUS329J1 Duplex Stainless Steel by Mechanical Milling and SPS Processing

O. Ciuca, S. Deng, K. Ameyama
Ritsumeikan University (Japan)

18B-S3-35

Development and Characterization Of ODS Ferritic Steels (Fe-Cr-Al-W) Produced by Mechanical Alloying and Consolidated by Spark Plasma Sintering

M. Campos¹, N. García-Rodríguez¹, L. Fuentes-Pacheco¹, B. Klöden², J.M. Torralba^1,3, T. Weissgärber^2
1Universidad Carlos III de Madrid (Spain), ²Fraunhofer-Institut für Fertigungstechnik und Angewandte Materialforschung (Germany), ³Instituto IMDEA Materiales (Spain)

18B-S3-36

Dense Nanostructured Nickel Produced by SPS from Mechanically Activated Powders

L. Minier¹, H. Couque², F. Naimi¹, S. Le Gallet¹, F. Bernard^1
1Université de Bourgogne, ²Nexter Munition (France)

18B-S3-37

Production of a Hybrid Tool Steel by Mechanical Milling and Spark Plasma Sintering

A. Fedrizzi¹, M. Pellizzari¹, M. Zadra^2
1University of Trento, ²K4sint (Italy)

18B-S3-38

Fabrication of Carbon Dispersed WC-FeAl Alloys Showing High Electrical Resistivity and High Strength

H. Nakayama¹, K. Kobayashi¹, K. Kikuchi^2
1National Institute of Advanced Industrial Science and Technology (AIST), ²S S Alloy, Co. Ltd. (Japan)

18C-S2-20 [KEYNOTE]

Polymer-Derived Ceramic/Metal Nanocomposites

R. Riedel, M. S. Bazarjani, A. Gurlo
Technische Universität Darmstadt (Germany)

18C-S2-21

Nanohybrid Powders of Ceria and Mullite for Catalytic Use by Sol-Gel Method

H. Suzuki¹, A. Hikasa^{1, 2}, N. Sakamoto¹, N. Wakiya^1
1Shizuoka University, ²Suzuki Mortor Corporation (Japan)

18C-S2-22Cancelled

18C-S2-23

Crack-Healing Function of Nano-Ni Particles Dispersed Al₂O₃ Hybrid Materials at Various Heat Treatment Conditions

D. Maruoka, M. Nanko
Nagaoka Univeristy of Technology (Japan)

18C-S2-24

Formation and Corrosion Behavior of High-Velocity Oxy-Fuel (HVOF) Sprayed Iron-Based Amorphous/Nano Coatings

J. Wang¹, Y. Wang^1,2, W. Sun¹, Y. Zheng^1
1Institute of Metal Research, CAS, ²Northeast Petroleum University (China)

18C-S2-25

Titanium Nano Composites Using Hydrogenated Method

M. Bardet^1,2, J.-L. Bobet¹, J.-M. Heintz¹, K. Xia², J.-F. Silvain^1
1Universite de Bordeaux, ICMCB (France), ²University of Melbourne (Australia)

18C-S2-26

Unique Microstructure Design for High Performance Titanium PM Materials

T. Sekiguchi, O. P. Ciuca, S. K. Vajpai, K. Ameyama
Ritsumeikan University (Japan)

18C-S2-27

New Developments of Fine-Grain Tungsten-based Composite Materials in China

J. Fan, Y. Han, T. Liu, J. Tian
Central South University (China)

18C-S2-28 [KEYNOTE]

Metal Matrix Composite with Nanometric Size Reinforcement: from Design to Characterization

J.-F. Silvain¹, J.-M. Heintz¹, C. Elissalde¹, N. Chandra², A. Kawasaki^3
1CNRS, Universite de Bordeaux, ICMCB (France), ²University of Nebraska-Lincoln (USA),
³Tohoku University (Japan)

18C-S2-29

Effects of Trace ZrC On Microstructure and Properties of Molybdenum Alloy

H. Cheng, J. Fan, Z. Qian, J. Tian
Central South University (China)

18C-S2-30

Development of New Refractory Materials

M. L. Troëdec, M. Gayot, J.-F. Silvain
CNRS, Universite de Bordeaux, ICMCB (France)

18C-S2-31

Development and Aplication of Nanoparticle Reinforced Metal-Matrix Composites for Cutting Tools

A. Zaitsev¹, D. Sidirenko¹, E. Levashov¹, V. Kurbatkina¹, S. Rupasov¹, V. Ahdreev^2
1National University of Science and Technology «MISIS», ²Company «Kermet» Ltd. (Russia)

18C-S2-32

Cemented Carbides with Nano Reinforced Binder – a New Class of Metal/Ceramic Composites

I.Konyashin¹, B. Ries¹, F. Lachmann¹, A. Mazilkin², B. Straumal^2
1Element Six GmbH (Germany), ²Institute of Solid State Physics (Russia)

18C-S2-33

Development of The Microstructure of Nanostructured Materials During Sintering

V. Richter, J. Poetschke, R. Holke
Fraunhofer IKTS (Germany)

18D-T13-12

Mechanical Properties of Cermets Using Titanium Carbonitride Solid Solution Powders

T. Matsuda, H. Nomura, Y. Nagano, H. Matsubara
Japan Fine Ceramics Center (Japan)

18D-T13-13

Properties and Cutting Performance of Cermets prepared from (Ti,Nb,Mo)(C,N) Solid Solution Powder

T. Umemura, T. Takahashi, S. Kinoshita, K. Hayashi
Tungaloy Corporation (Japan)

18D-T13-14

Microstructure and Cutting Performance of TiN-WC-Co based Cermet with βFL

D. Takesawa, T. Takahashi, S. Kinoshita, K. Hayashi
Tungaloy Corporation (Japan)

18D-T13-15

Microstructures and Mechanical Properties of TiMoC-Ni Cermets

H. Hosokawa, K. Kato, K. Shimojima, A. Matsumoto
National Institute of Advanced Industrial Science and Technology (AIST) (Japan)

18D-T13-16

Interface Structure of TiN-Ni Cermet Prepared through Mechanical Milling of Elemental Powders and Pulsed Current Sintering

H. Nakayama, K. Ozaki, K. Kobayashi
National Institute of Advanced Industrial Science and Technology (AIST) (Japan)

18D-T13-17

Mechanical Properties of Wet Milled TiC-FeAl Alloys under Various Milling Conditions

K. Shimojima, A. Matsumoto, K. Kato, H. Hosokawa, Z. Sun, S. Nakao
National Institute of Advanced Industrial Science and Technology (AIST) (Japan)

18D-T13-18

Formation of Surface Gradient Layer on Ultra Fine Grain Cermet

T. Nakaoka, T. Tokunaga, H. Kinoshita, K. Hanaki
Kyocera Corporation (Japan)

18D-T13-19

Near-Surface and Interface Microstructures in (Ti,W)(C,N)-Co,Ni Cermets and (Ti,W)(C,N)/Co,Ni-WC/Co Laminates

S. Wawrzik, W. Lengauer
Vienna University of Technology (Austria)

18D-T13-20

Binder Phase Improvement on the TiC/TiB₂ Based Cermets

A. Momozawa, T. Usui, T. Teraoka, W. Koike, K. Takagi
Tokyo City University (Japan)

18D-T13-21

Effects of Alloying Elements on the Properties of Mo₂NiB₂ Boride Base Cermets

K. Takagi, T. Kamijyo, A. Momozawa, T. Fujima, N. Shiraki
Tokyo City University (Japan)

18D-T13-22

Bulletproof Performance and Material Design of BTC Bodyarmor

K. Nishiyama¹, K. Tanaka¹, H. Nishiyama¹, K. Kaneko², R. Telle^3
1Tokyo University of Science, ²Nichiwa Kogyo Co., LTD. (Japan),
³RWTH Aachen Institut für Gesteinshüttenkunde (Germany)

18D-T13-23

Effect of cBN Content and Particle Size on Adhesive Strength of AIP-PVD TiN Coating Layer onto PcBN Substrate

K. Kobayashi, Y. Fukushima, N. Kagawa, T. Takahashi, S. Kinoshita, K. Hayashi
Tungaloy Corporation (Japan)

18D-T13-24

Wear Mechanisms of Sintered Diamond Tools

J. Konstanty
AGH-University of Science & Technology (Poland)

18D-T13-25

Fabrication of Diamond Impregnated Tool Using Iron Nano Powder Binder

G.-Y. Lee¹, S.-M. Yoon¹, S.-D. Lee², J.-G. Kim¹, J.-S. Lee^1
1Hanyang University-ERICA, ²Shinhan Diamond Co. Ltd. (Korea)

18D-T13-26

Key Metallurgical Phenomena Involved in the Sintering of Prealloyed Powders Designed for Diamond Impregnated Tools

C. Luno-Bilbao^1,2, N. Vielma^1,3, A. Mancisidor^1,2, J.M. Sanchez^1,2, I. Iturriza^1,2
1,2CEIT and TECNUN (University of Navarra), ³Lortek (Spain)

18D-T13-27

Properties and Applications of Ultra-hard Nanopolycrystalline Diamond Synthesized by Direct Conversion Sintering of Graphite under HPHT

H. Sumiya, K. Harano
Sumitomo Electric Industries, Ltd. (Japan)

18D-T13-28

HTHP Synthesis of Nanocomposite of cBN and wBN and its Characterization

Y. Ishida, H. Sumiya
Sumitomo Electric Industries, Ltd. (Japan)

18E-T10-1

Densification and Microstructure of Nanocrystalline W-(25/30)Cu Powders

J. Fan, Y. Guo, T. Liu, Z. Song
Central South University (China)

18E-T10-2

High-temperature Mechanical Properties of Tungstencopper (W-Cu) Alloy

D. G. Lin¹, S. J. Park¹, Y.-S. Kwon^2
1Pohang University of Science and Technology (POSTECH), ²CetaTech, Inc. (Korea)

18E-T10-3

One- and Two-Component Tungsten Powder Injection Molding for Manufacturing Fusion Reactor Devices

V. Piotter, S. Antusch, P. Norajitra, K. Plewa
Karlsruhe Institute of Technology (KIT) (Germany)

18E-T10-4

Effects of Heat Treatment on the Mechanical Properties of Carbon-added Molybdenum

T. Kadokura¹, Y. Hiraoka², A. Ikegaya^1
1A.L.M.T.Corp., ²Okayama University of Science (Japan)

18E-T10-5

Formation of Titanium Alumindes from Elemental Titanium and Aluminum Powder Mixtures

N.-K. Park¹, G.-S. Shin¹, Y.-T. Hyun¹, J.-H. Park^2
1Korea Institute of Materials Science, ²MTIG (Korea)

18E-T10-6

Viscosity of Supercooled Liquids and Impact Strength in Zr-Cu-Ni-Al Bulk Metallic Glasses

M. Yamada¹, T. Yamasaki¹, Y. Yokoyama², H. Kurishita², A. Inoue^2
1University of Hyogo, ²Tohoku University (Japan)

18E-T10-7

Effects of Noble Metal Additions on Mechanical Properties of Zr-Cu-Ni-Al Bulk Metallic Glasses

T. Yamasaki¹, M. Yamada¹, H. Ogino¹, K. Fujita², Y. Yokoyama³, H. Kato³, A. Inoue^3
1University of Hyogo, ²Ube National College of Technology, ³Tohoku University (Japan)

18E-T10-8

Electrical and Mechanical Properties of Sheets Produced by Powder Rolling Process Using Rapidly Solidified Cu-Zr-Ag Alloy Powder

S. Miyakawa¹, M. Nishida¹, N. Nishiyama², H. Miura², A. Inoue^3
1Fukuda Metal Foil & Powder Co., Ltd., ²RIMCOF Tohoku University Laboratory,
³Tohoku University (Japan)

18E-T10-9

Age-Hardenability of Cu-Ni-Sn Sintered Compact

S. Terai, Y. Arami, M. Tanaka
Fukuda Metal Foil & Powder Co., Ltd. (Japan)

18E-T10-10

Powder Metallurgy Friction Materials for High-power Wind Turbines

P. Yao, Y. Xiao, X. Xiong
Central South University (China)

18E-T10-11

Self-Lubricating Sintered Bearings with Reduced Friction (LFC®)

F. Cabestany, M.C. Monterde, J.A. Calero, J. Morató, M. J. Dougan
AMES S.A. (Spain)

18E-T10-12Cancelled

18E-T10-13

Sliding Material Made of Copper Alloy Infiltrated Carbon/ Carbon Composite for Train Vehicle

K. Hasegawa, N. Ishihara, T. Maejima
FINE SINTER CO., LTD. (Japan)

18E-T10-14

Sintering Behaviors of Fe-Al Based Composites for High Temprature Silding Bearing

Y. I. Kim1, S. C. Park1, J. M. Jang1, B. Cha2, W. Lee1, J. Shin1, S.-H. Ko1
1Korea Institute of Industrial Technology, 2Samsung Electro- Mechanics Co., Ltd (Korea)

18E-T10-15

Microstructure Control for Improving the Mechanical Properties of Ce-TZP/BaAl₁₂O₁₉ Composites

S. Ori, T. Kojima, N. Uekawa, K. Kakegawa
Chiba University (Japan)

18E-T10-16

Diluent-free Combustion Synthesis of Pure β-SiAlON Using Natural Kaolin

J. Niu¹, X. Yi², I. Nakatsugawa³, T. Akiyama^1
1Hokkaido University (Japan), ²Northwest A&F University (China),
³Combustion Synthesis Co., Ltd (Japan)

18F-T4-1

Importance of Modeling Densification and Shape Change during HIP of Near Net Shape PM Components

V. S. Warke¹, S. Davies^2
1Bodycote HIP, Inc (USA), ²Bodycote HIP, Ltd. (UK)

18F-T4-2

The Current Situation and Trend of HIP Application in the Powder Sintering Field in Japan

T. Shiokawa, Y. Yamamoto, M. Takahashi, M. Ueda
Metal Technology Co. Ltd.(Japan)

18F-T4-3

Application of HIP Process to the Manufacture of Dense Calicium Carbonate Materials (Coral Sands)

S. Morokoshi, Y. Nagamachi
Metal Technology Co. Ltd. (Japan)

18F-T4-4

A Novel Heat Treatment Method with Unusual Flexibility

M. E. Gärdin
Avure Technologies AB (Sweden)

18F-T4-5

Stainless Steel Powder with Ultra-low Content of Carbon and Oxygen

A. Chychko, S. Sundin, C. Pellegrini, L. Karlsson
Erasteel Kloster AB (Sweden)

18F-T4-6

Criterion for the Full Densification in Hot Pressing of Metallic Glass Powders

R. Watanabe¹, N, Yodoshi², A. Kawasaki^3
1Japan Aerospace Technology Foundation, ²Institute for Materials Research, ³ Tohoku University (Japan)

18F-T4-7

Mechanical Properties of Direct Metal Laser Formed Ti Alloy Parts

H. G. Kang, K. Yamada, T. Osada, F. Tsumori, H. Miura
Kyushu University (Japan)

18F-T4-8

Formation of Bronze Porous Layer on the Ferrous Substrate by Laser Forming

T. Nomoto¹, H. G.Kang¹, T. Osada¹, F. Tsumori¹, H. Miura¹, K. Kato^2
1Kyushu University (Japan), ²OILES Industry, Ltd. (Japan)

18F-T4-9

Selective Laser Sintering of High Temperature Resistant Thermoplastics Powders

E. Dumoulin¹, C. Colin¹, J. Renard¹, R. Allain^2
1Ecole des Mines de Paris, ²Poly-Shape (France)

18F-T4-10

Additive Manufacturing of Powder Metal Components for Rocket Engines

J. Halchak, B. Mc Enerney, Y. Gao
Pratt & Whitney Rocketdyne (USA)